Clone A ViewSat * STB --> STB Data Transfer between VS boxes by teach
(Instructions courtesy samdesi)
For use in cloning one ViewSat to another.
a. Connect the "Master" ViewSat to your TV; Power switch "ON"
b. Connect the "Clone" to the wall power; switch Power "OFF"
c. Connect the "Master" and "Clone" ViewSats using a NULL MODEM cable
d. MENU--INSTALLATION--RECEIVER UPGRADE--ALL INFORMATION
e. "OK" and the "MASTER" ViewSat sets up to send data to the "Clone" ViewSat
f. Turn the "Clone" ViewSat's power switch to "ON" and the transfer begins
NOTE: AFter the transfer is completed, the "Clone" ViewSat needs up to 1 minute to process the transferred data.
Watch the Front Panel on the "Clone" ViewSat. "inst" will be displayed for ~ 15 seconds "DONE" will be displayed for ~ 10 seconds REBOOT will occur automatically without user intervention " on " will be displayed during reboot "0 0 0 0" will show when the "Clone" has finished--no more than 1 minute after data transfer
You may now Power "OFF" the "Clone" ViewSat, disconnect the NULL MODEM cable and go use your new Clone ViewSat
