LK or anyone, in desperate need of help

 

Bronze Member
Username: Zeus1111

Winnipeg, Manitoba Canada

Post Number: 68
Registered: Jun-06
I had just recently rearranged my living room moving the TV and my Pansat 2700a to a differnet loaction. my pansat was working fine before i moved it but because i disconnected it then reconnect it must have lost the signal or something (which is very wierd).. i cant seem to get a signal at all and when i go into antenna set up most thigns are either off or disabled.. can anyone just help me out as to how i can get my signal back? i dont think i actually have to reposition my satellite. THank you in advance
 

Bronze Member
Username: Ganjaman

Post Number: 24
Registered: Jun-06
make sure you re-attached the cable at "IF Input" and not "Ant IN"
 

Bronze Member
Username: Zeus1111

Winnipeg, Manitoba Canada

Post Number: 69
Registered: Jun-06
That was the problem! thank you very much!
 

Silver Member
Username: Satscanner

NDS Laboratory

Post Number: 425
Registered: Nov-06
Make shure the output channel switch,[whitch is a very tiny slide switch by the coax connections is on channel 3] sometimes you can unknowingly touch and move it when connecting/disconnecting the cables.Then switch on/off the reset toggole switch and watch tv.
 

Silver Member
Username: Satscanner

NDS Laboratory

Post Number: 426
Registered: Nov-06
U answered will I was posting.But note switch for future problems.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us