just laod the new bin.. Insert the Memory Stick in your PC and transfer the bin in. Than insert in your STB and in the Main Menu select System information and press OK - Select Receiver Upgrade and press OK - Go down to the bottom of the window, select USB and press OK - A new window its open with some Corean files, years, etc. - In the bottom of the window its your bin select and press OK - VERRY IMPORTANT. DON'T TURN THE POWER OFF - After you load the bin, the STB will reboot automatic - Wait for Autoroll and wach TV
Step By Step: How To Load An Viewsat Ultra File By USB If you download a zipped file make sure you use winzip or winrar to extract the bin file.
1.Place bin on the flash drive from PC 2.Insert USB into STB receiver 3.Go to Menu, System Information, receiver Upgrade 4. Select USB 5.Then BAM it flashes and reboots all in less then 6 second and you set sats and scan
You have autoroll on your VS. copy the bin after you download on your PC and paste the bin on your memory stick. Apply to USB port on ultra and do as above. Use copy and paste to apply bins, chaninfo,satinfo, etc.