Blind scanning problem..

 

Bronze Member
Username: Andrewmenia911

Post Number: 28
Registered: Nov-06
i just uploaded the bin 288 on my pansat 2700A and whenever i tried to do a blind scan it never reach the end as it come to a random percentage and it stops on it.. also i don't have any ppv on it.. it just say dishnet tickit..
i'm trying to scan 119 west.. what should i do?
 

Silver Member
Username: 18_volts_baby

Super Moder...

Post Number: 158
Registered: Aug-06
Well I would first check tp levels make sure you have strong reading on all the tp's

Then I would do a Network Scan..

Blind scan is great for finding wildfeeds on unknow birds... Not really the recomended method of choice when one needs to update channels on v3b or DN
 

New member
Username: Mama835

Canada

Post Number: 1
Registered: Dec-06
please help i can't scan echostar3, everytimes i got express vu chanels.
i put new keys, autoroll off maybe i have problem with DiSeqC please help
 

Silver Member
Username: Hardrockstriker

Post Number: 632
Registered: Apr-06
1. make sure your dish lnb is aimed to correct satellite.
2. make sure your switch settings are correct in your receiver.

Blind scan should work without a problem. If it hangs then either your signal level is too low, or, your pointing to the wrong satellite (either through dish/lnb aiming or switch settings).
 

Silver Member
Username: Osc

PUERTO RICO

Post Number: 406
Registered: Sep-06
There's only 1 ppv in sat 119 if you want to catch them all the ppv you need to add sat 110
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us