Viewsat Xtreme Problem

 

New member
Username: Sstwired

Post Number: 4
Registered: Jun-06
I have a Viewsat Xteme VS2000, loaded with the 061030.PGM file, everything working fine, currently have the Autoroll problem with the one provider and have been entering keys manually, no problems, receiver working well. While in use I had a momentary power outage that has shut down the receiver, now when I power on the rear switch the receiver display starts with --.-- then it displays "on" and is locked up, no response from the remote or front panel switches, obviously blank tv screen.
Any suggestions?
 

Bronze Member
Username: Ffpalms

Palmdale, Florida USA

Post Number: 16
Registered: Jun-06
Try to load factory bin, then the new bin that came out today. That should fix it.
 

Bronze Member
Username: Chrissymegan

Post Number: 16
Registered: Sep-06
I tried today's bin and still it didn't autoroll. did anyone had problem?
 

Bronze Member
Username: Tapeman

Post Number: 95
Registered: Oct-06
Put an older PGM and put keys manually
- There seem to be bugs with new PGMs
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us