How To Update The Keys Manually For FTA.

 

Silver Member
Username: Mc_sunny

Post Number: 552
Registered: Feb-06
How to update the keys manually for Pansat 2500 / FLU / Pantec / clones ...

--------------------------------------------------------------------------------

At times when providers modify their autoroll mechanism you need to be able to turn off Autoroll and enter the newest keys manually.

Here is the sequence for the Blacklist and clone safe versions.

Enter the menu Parental Control -> Second PIN (enter 0000 or whatever PIN you used). This is the CAS SYSTEM screen. Move to Autoroll option and turn OFF the provider (DN/Bev/Globecast) for your system. Be sure to leave the Keycode ON. Return to the CAS SYSTEM screen and select Nagravision 2.

Next find the correct provider (DN is Provider ID 01 01/ Bev is Provider ID 09 01) using the Left/Right pointing keys on the remote. Move to the Key Number field. The values here are 00 and 01. Select which key needs updating (either Key 00 or Key 01) and move to Key Data field. The alphabetical codes are entered using the buttom two rows of the remote which correspond to A B C followed by D E F. On the screen there is a reminder of which remote key corresponds to codes.

Enter the new correct key (double check it matches) and press OK to store new key. Exit menu system and watch tv. It may take a few seconds for the picture to come in. Enjoy.

__________________

Pansat 3500-s
1.Menue
2. perental controlls Enter 0000 for secound pin only
3. set default keys
4. select nagra 2
5. enter key 00 in the first line
6. change key # from 00 to 01
7. enter key 01 in line two (use guide on the bottom of your TV screen for letters)
8. once keys are correctly entered press ok on remote to save your new keys.
9. you may have to set defauly keys to which ever key is active (IE) 00 0r 01 when you save and exit.
exit out of all screens and yore done
__________________

COOLTECH & Co0lSat 4000

--------------------------------------------------------------------------------

How to change the cooltec & cooltech Nagra 2 keys
Just press 8282 and when the screen shows you the four sets of numbers enter the new keys into the numbers
Leaave lines 10 and 11 with the old keys and put the new keys in line 20 and 21. the old keys are still good but inactive, the new keys are the active ones. so it looks like this;
10 = old key 00
11 = old key 01
20 = new key 00
21 = new key 01
__________________


Multistar Key Change

--------------------------------------------------------------------------------

Go into the Multistar Key Editor.
You will see an entry as follows :
CA Type : Nagra2
Priovider: 0001 Dishnetwork
Key00: 0A4C4DA09A68AC8F8B0DC0743B703559
KeyM1: 0A645E6002A8B718BF0F2BD7D61819F0
A bunch of "key" looking numbers/letters
A bunch of "key" looking numbers/letters
A bunch of "key" looking numbers/letters
KeyX1: 03
__________________


Viewsat Platinum

1-menu
2-installation
3-your pin code
4-code
5-Nagra
6-key 00 goes in lines 08/88 ( In duplicate )
7-key 01 goes in lines 09/89 ( In duplicate )
8-Exit
9-Save
__________________

Ariza 700 / 750cx

--------------------------------------------------------------------------------

Ariza 700 / 750cx changing Keys
Go to menu,
Go down to parental controls,
enter.....then press "i" buttoin on remote control,
then press 2004. that should get you into the coding system menus.
Go to nagra 2,
go dwn to key 00,
look for Dishnetwork a top. Type in key 00.
If you type in 8 number for key 00 and 8 for key01, it mite not work. Try that first.
Then if its dosn't work, type in all 16 numbers in key 00 (in the two rows), that worked for me.
Make sure to press OK button on remote after you type in each row, to save.
Then just exit till you see the picture
__________________


How To Load Key's In Digawave
Go to menu
Now got to System setings and press the red boton.
Right click untill you see NagraVision 2.
Go down one to provider ID and right click untill you see dishnetw0rk
Go down to key no 00 and put both keys in the same line.
Once you are done that go to Save Keys and exit out of everything.

You will half to delet the sats you dont whant and do a bline scan. I seem to cant load channel list anymore.
__________________


Techsat Ultra

--------------------------------------------------------------------------------

The process to load keys is as follows

in the MAIN MENU

1 Go to OTHERS=press ok
1 Edit code =press ok
3 N-CODE =press ok
4 Find PPID 0101 INDEX 00 HIGHLITE
5 Push OK (a curser will appear
6Move kurser to the beginning of key
7 CH up and down enters code
8 press OK
Find PPID 0101 INDEX 01 HIGHLITE
9 REPEAT PROCESS
__________________



How To Manually Enter Keys For Lifetime Ultras:
-------------------------------------------------------
Click Menu on the remote
Then side arrow to Channel Edit
Then down to Code then Ok then 1668 or 1010
Then side arrow to turn code Off just to be safe
Then down to Nagravision then OK
Then side arrow to Dish Network
You need to change the keys on two lines.
In Provider Id it will be 00 // 01
Then down arrow to Key Number & Make change
Then down arrow again to Key number & make change
Then Hit Ok to save. Then Exit once
Then side arrow once, then 1668 to turn code back ON
Make sure your Key Code Function is On
Your TV should work now after you exit out
__________________



How to enter key for Mvidea

--------------------------------------------------------------------------------

How to enter key for Mvidea

1) Press "Menu"
2) Then enter "8888"
3) Press "blue" button on the RCU to change list. Then select N2
4) Select the line you want to change keys
5) Then press "OK"
6) If you did everything right, you will see "Edit Key Information"
7) With red and green button you move side to side.
8) Press green to skip the spaces you don't need to change.
9) Once you get to the key. Input the numbers with your RCU
And with the "<>" select the alphabet letter which you want to select and press "OK" to select.
10) Last once you are done, select "OK" on the "EDIT KEY INFORMATION" by using "<>" on the RCU.

And you are done...

Now do the same with the second line of the key
__________________
 

New member
Username: Jrluis305

Miami, Florida U.s.a.

Post Number: 1
Registered: Oct-06
I'm new with pansat 2700 how do i put bin files on it and what programs do i need i would like step by step directions
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us