Fortec Star Liftime Ultra help is set Pal i need Ntsc

 

New member
Username: Telekon

Bremerton, WA Usa

Post Number: 1
Registered: Oct-06
just got it new. from Montreal. Seems to be set to Pal. I have got a semi picture sending the signal thru a enhancer. Can somebody be my eyes and tell me how to switch it to ntsc. using the remote. like push arrow up twice, etc. please help.
 

Silver Member
Username: Albino_midget

Post Number: 239
Registered: Jul-06
HOW TO GET YOUR TV SCREEN FROM PAL TO NTSC. Make sure the little channel switch in back is set correctly with your TV.
Turn receiver on then click MENU on remote once
Click down arrow three times on remote.
Click OK on remote.
Click side arrow on remote until you can see TV.
There are 3 settings. NTSC,AUTO & PAL

This was a C & P from another site.
good luck!
 

New member
Username: Telekon

Bremerton, WA Usa

Post Number: 2
Registered: Oct-06
That did not work. the part click side arrow on remote till you see tv, you never see clear tv.
I need full directions, without me having to see the screen, on which buttons to push. thank you.
 

Silver Member
Username: Albino_midget

Post Number: 240
Registered: Jul-06
best to be your own EYES
good luck?
 

Silver Member
Username: Morispastora

Fotwilliams-, Ontario Canada

Post Number: 631
Registered: Aug-06
You got that for downloaded the 281T bin, you wil read before you download something a your STB
 

New member
Username: Telekon

Bremerton, WA Usa

Post Number: 5
Registered: Oct-06
Jaime, your post is jibberish, to me. dont know what it means at all.
I have though made progress, buy pushing buttons like a maniac. as far as i can remember, i only pushed down and ok, no right arrow, at it came on. everything works fine.
Now I need help in loading it the new stuff, if anybody can give me simple instruction, that would be cool. Cheers!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us