Pansat clone 2500 er1 fail


New member
Username: Ganga

Post Number: 3
Registered: Sep-06
have a pansat 2500 clone; loader 1.4 with 279t bin; once I load it says failed er1, any suggestion

Bronze Member
Username: Simikang

Post Number: 74
Registered: Jul-06
check your com port or your wire or if the receiver is on from the back

Silver Member
Username: Nikk

Post Number: 297
Registered: Sep-06
For a 2500 you need to use a RS232 straight cable, that's probably the problem you have, check what kind of cable you are using....
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us