Cant scan channels on 110?


New member
Username: Roddy

Post Number: 2
Registered: Sep-06
New file loaded on Pansat clone... have done a blind scan and got all 119 channels but whatever I do I cant get the 110 channels. Whatever I select, whether its 8.10 or 7 and whether I put them on Diseq 1 or 2 all I seem to get is all the 119 channels. Is it a problem with one of the lnbs? I used to get channels from both.
Any ideas would be appreciated.. thanks !

Bronze Member
Username: Ryersonresurrected

Post Number: 14
Registered: Sep-06
i've seen similar posts, and i've experienced similar problems.....but i was already having this problem last week, before the latest bin.

I understand scanning them seperately usually works for this....disconnect the 119, and try rescanning the 110 by itself.

Are u using a DishPro, or Dish 500? Or a standard dish?

Silver Member
Username: Jrq

Post Number: 137
Registered: Jul-06
Paul, a lot of folks are having trouble with the PS clone running on the new fix - especially on 110.

Try a new scan as Ryerson suggests.

New member
Username: Roddy

Post Number: 6
Registered: Sep-06
Thanks, I did try a new scan but even though I highlight sat 8.10 it still just picks up all the channels from 119 ! I took my receiver round to a friends and scanned there and it picked up all the 110 channels but when I connect up at home I dont get a signal for them!!

Bronze Member
Username: Bones714


Post Number: 54
Registered: Mar-05
Your satellite is'nt prolly hooked up right, check your diseqc.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us