ECM working **update** 9-30-06


Silver Member
Username: Mc_sunny

Post Number: 324
Registered: Feb-06
Whats Working Now? 9-28-06

9/28/06--> Working: C0olsat 5000 [cardless]
9/28/06--> Working: Pansat 6000 [cardless]
9/28/06--> Working: Pansat 5000 [cardless]
9/28/06--> Working: Fortec Full pannel (2300) [cardless]
9/28/06--> Working: Fortec Half pannel (2300) [cardless]
9/27/06--> Working: Pansat 2700 Clone [cardless]
9/27/06--> Working: Fortec Ultra/Pantec MX-V1/Pansat Clone [cardless] (clone 2500)
9/27/06--> Working: Pansat 1500 [cardless]
9/27/06--> Working: Vortex 3500S [cardless]
9/27/06--> Working: Pansat 2300 [cardless]
9/27/06--> Working: C0olsat 6000 [cardless]
9/27/06--> Working: Pansat 2500 [cardless]
9/27/06--> Working: Ariza 800 [cardless]
9/27/06--> Working: Ariza 750 [cardless]
9/27/06--> Working: Ariza 700 [cardless]
9/27/06--> Working: Pansat 2700A/E [cardless]
9/27/06--> Working: Pansat 3500 [cardless]
9/26/06--> Working: ExtremeView Magnum XV3300 [cardless]
9/26/06--> Working: Viewsat PVR7000 [cardless]
9/26/06--> Working: DVB PCI Card (windows) [cardless]
9/26/06--> Working: SkyView RX600 [cardless]
9/26/06--> Working: CaptiveWorks CW-600S [cardless]
9/26/06--> Working: CaptiveWorks CW-600 Premium [cardless]
9/25/06--> Working: DVB PCI Cards (linux) [cardless]
9/25/06--> Working: Buzz S2010F [cardless]
9/25/06--> Working: Buzz S2010F Plus [cardless]
9/24/06--> Working: CaptiveWorks CW-1000S [cardless]
9/23/06--> Working: Sonicview PVR1000 [cardless]
9/23/06--> Working: Sonicview SV-1000 [cardless]
9/23/06--> Working: Viewsat Xtreme [cardless]
9/23/06--> Working: Viewsat 2000/Platinum/Lite [cardless]

NOTICE for Viewsat users: These new bins have an extra step involved. When finished it will say END, then 00.00, then boot, then END, then back to last channel or 00.00. You must wait until this process finishes before unplugging.

FTA fixes such as Card/Internet sharing or "aux" card and others listed below.

9/25/06--> Working: DGStation Relook 400S (w/Rom102 & 10b blocker)
9/25/06--> Working: Relook 400s (w/Rom102 & 10b blocker)
9/20/06--> Working: ExtremeView Magnum XV3300 (w/ "auxed" Rom102/103) [emulation]
9/19/06--> Working: Dreambox (w/ Rom102/blocker or "auxed" card sharing)
9/19/06--> Working: C0olsat 4K, 5K, 6K (w/ "auxed" Rom102) [emulation]
9/12/06--> Working: Neosat iPro 1000 (w/ Internet Key Sharing - IKS)


Do NOT use Official Pansat, C0olsat or Viewsat files on any Clones!

Bronze Member
Username: Ttope

Post Number: 23
Registered: May-06
Is there a fix for fortec classic NA ?

Silver Member
Username: Mc_sunny

Post Number: 325
Registered: Feb-06
no there is no fix for fortec classic at this moment

New member
Username: Mississauga

Post Number: 9
Registered: Apr-06
Is a new ECM on Stream. I get bad or scrambled channel for TV Asia and Zee TV (Channel 613 and 611)

New member
Username: Hvs

Post Number: 4
Registered: Aug-06
I am also getting bad or scrambled channel for different asian channels........

Silver Member
Username: S_dot

United States

Post Number: 111
Registered: Jul-06
there is also a fix for neusat sp6000

Bronze Member
Username: Cramped

Post Number: 37
Registered: May-06
Sometimes you have to turn off with remote than shut your receiver down (from the back) and start it up again. Do a satellite/blind scan and you should pick the channals that changed TP's.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us