#3 Then go to nagravision and select it by pressing ok button on your remote...
#4 In Nagravision window you should be in the box that is Entitled "Provider ID"...scroll to the right (press right arrow button on remote) until it switches to Dishnetwork (00 01)
#5 Now In Nagravision window go down (press down arrow on remote) to the box that contains "00" entitled "Key Number"
#6 While in the box (highlighted "Key Number") that contains "00", scroll to the right until you see nagravision 2 at the top left of your screen
#7 While in Nagravision2 you should still be in "Key Number" box and the number in that same box should be "00"...this is for Key 00
#8 Scroll down (press down arrow on remote) to key data and enter the new supplied key for 00 (within this site is the key change for Nagravision2)..take note on how to enter letters in the lower portion of the screen (ex. letter E=FAV button on remote)
#9 Once key is edited select OK button on your remote (OK-STORE confirmation blinks twice in lower right of screen)
#10 go back to the "00" box and move one click to the right which should take you to "01"..this is to edit the "01" key
#11 Follow Steps 8 & 9 above (this time enter key data for key 01 instead of 00)
#12 Click exit and click ok or yes to save changes then exit all the way out and you should be watching tv
Note...For /Bell keys at step #4, "Provider ID" is 09 - 01 ..................................................
How to change the NAGRA2 Key codes (for Fortec Lifetime Ultra only)
1- Press Menu button on your remote control
2- Press right arrow key 2 times Channel Edit
3- Press down arrow key button 2 times, press OK (Code) enter 1010
4- Press the down arrow key to Set Default Key, click OK
5- Press the up arrow key to Nagravision click OK
6- On your top left you should see Nagravision-1...if not, then you've got the wrong BIN version.
7- Press right arrow key until you see Dish Network on top
8- Press the down arrow key once to Key Number
9- Press right arrow key 2 times the from Key Number 00 - 01 - 00
( Now take notice that on your top left you should see Nagravision-2 now )
10- Then press DOWN button key to change the keys manually on Key Number 00
11- Enter new Keycode, do the same procedure to enter the the keys on Key Number 01
Note: Satellite Providers changes the stream key codes unpredictably,
(Note: remote control key letters equivalent) A = Sat, B = i, C = Tv/Radio, D = Pause, E = Audio (speaker), F = EPG
12- Check and make sure that you got all the keys....Press OK to store (save)
13- Press EXIT key 3 times to exit to the channels.
Note: If you accidentally lock the KEYCODE (OFF) use this default password 1668
How To Manually Enter Keys For Digiwave: ------------------------------------------------- 1- Press MENU 2- Scroll down to System Setting. 3- Press OK. If you see a red dot in the botton/left of your screen, go to step 5 4- Enter number 1004. A red dot will come out at ur bottom left. YOU DO NOT NEED TO DO THIS STEP w/ lastest bins. 5- Press red button (audio). 6- Press right arrow until NAGRA appears in the first line. 7- Down arrow up to Provider and right arrow up to 0001. 8-Now scroll down to first key line and press OK. scroll to the letters and number and enter Key 00. Get keys from Maestra or another site or using a key grabber program 9-Scroll down to second key line, press ok. and enter key 01 10- Scroll To Save Key and 11- Press OK. 12- Exit and Enjoy
How To Change N2 Keys Ariza 700
1) Press Menu
2) Scroll Down to Parental Control, Press Enter
3) Press "i" key on remote, then enter pin number "2004"
4) Scroll down to Set Default Key, Press Enter
5) Scroll up to Nagravision, Press Enter
6) Press VOL Right twice, you will see Dish Network
7) Press CH Down once, then VOL Right Twice, you will now see Nagravision 2 displayed top left
You are now at the key 00, Press CH Down once so you can edit the Key Data
9) Enter your new keys (write down the old ones to be safe)
10) Press Ok to store, then repeat with key 01
11) Press exit until you get back to tv, all channels will be available
Spacestar manual key change:
Press Menu--> Configuration--> Embedded Cas--> Nagra 2--> The press idea Dish Part1.
There you will see F1 & F2
Update F1 with the first 16 digits of the new idea key. Update F2 with the second 16 digits of the idea key.
After updating the keys, press "EPG" to save then press "EXIT" and watch tv!
To do this you will need the current keys. If you do not have the current keys..
1. On you Co0lsat go to a channel even if it say scrambled. 2. On the remote hit 8282 bringing up the "Key Edit" screen. 3. Tab 1 you will see Nagravision with CAS Nagravision and Ident D-N (0001) 4. Use the Channel Down on the remote to scroll down to the line beside "10" 5. You will have 8 sets of 2 digits highlighted, this is where you edit. 6. On the remote enter a number with the keypad or hit info to change each of the two digit keys. 7. Scroll down to 11, 20, and 21 to do the same with the different keys. 8. When you are done hit "Exit" on the remote and select "Yes" to save changes and exit out to watch television.
RIGHT arrow x 1 puts you on the 2nd line of numbers with "08" in the first column; you start punching in the below at the 2nd column ("C3" as of 11-04-05)
"Text" key + "2" = "F2", RIGHT arrow
"9" + "8" = "98", RIGHT arrow
"7" + "4" = "74", RIGHT arrow
"4" + "4" = "44", RIGHT arrow
"1" + "F3" key = "1C", RIGHT arrow
"6" + "5" = "65", RIGHT arrow
"7" + "7" = "77", RIGHT arrow
"F4" key + "8" = "D8", RIGHT arrow ...
finishing the top line You should have the highlighted box in the first column of the 2nd row on top of "08"
DOWN arrow, RIGHT arrow to the 2nd box in the 3rd row