Bronze Member Username: Starz98Post Number: 16 Registered: Jul-06 | I cant seem to get the loader to find a com port. I keep getting error msgs. They say I need a null modem cable. Is this different that what came with it? thanks | |
Silver Member Username: HardrockstrikerPost Number: 491 Registered: Apr-06 | What, specifically, are the messages? Your cable should say on it if it's a null modem cable. If it says nothing then it's probably just a straight thru. | |
Bronze Member Username: KriskrosPost Number: 29 Registered: May-06 | I received a bad cable with the box, I couldn't upload anything. I think the cable was just regular computer cable, not null cable. Sounds like you have the same problem. i had to use null cable from pansat to upload, it worked well. just have the place you bought it from replace the cable and make sure its null cable. | |
Bronze Member Username: MrcharleyPort norris, N.j. U.s.a. Post Number: 22 Registered: Sep-05 | if it is not a null cable problem I would suggest if you keep your computer on for long periods. try rebooting your computer. I have a dell and have comport problems and know for sure that I am using a null cable. it will not load sometimes because it has trouble with tne comport connection. I reboot and it works. | |
New member Username: Dave_kumarPost Number: 8 Registered: Aug-06 | need help please . i have a viewsat 2000 palt... and it dones not pick any sgnal ,it just say searching for signal , why is that ,cant someone tell me what to do. |
|
New member Username: JaysonPost Number: 7 Registered: Aug-06 | dave.....try changing your LNB type to standard....of course that's assuming you have the right bin and keys..... | |
New member Username: Bucky_covinPost Number: 4 Registered: Aug-06 | I have tried several times to load my new out of the box VSextreme. I was giving me just an error code. When I check the conection, it says it is connected. Now it is saying: Resending ZRQINIT and then it says: Frame Type 255: 70bc 2f f3, but it goes right back to Resending ZRQINIT But the status bar is not moving and the display on the stb still says noCH. Is it loading or what? |
|
New member Username: JaysonPost Number: 8 Registered: Aug-06 | bucky....you need to have the rear switch off......just when you press the upload button then you turn the switch on on your receiver..... | |
Bronze Member Username: ChackboomPost Number: 14 Registered: Jun-06 | VS is good. Loader is bad. It takes me 2 hours figuing out to load a file | |
Silver Member Username: TimscarletUsa Post Number: 222 Registered: Feb-05 | i noticed on the new viewsat bins, the satellite setup shows good signal, but when going out into the channels, the signal says "searching for signal", even though i just saw there was a good signal in the satellite setup! i would just never mind the signal at the bottom, and let it autoroll and see what happens like i did. hope it works for you. | |
New member Username: Bucky_covinPost Number: 5 Registered: Aug-06 | Mrcharley, Thank you,,, I rebooted and everything loaded just perfect the 1st try. Thanks again. |
|
Bronze Member Username: KllPost Number: 43 Registered: Jun-06 | my vsat giving me normal pict than frosen pict and Searching for signal than coming back to normal and than again loosing signal. Any ideas? | |
New member Username: Dave_kumarPost Number: 10 Registered: Aug-06 | is there any new key for viewsat 2000 plat dn. |
|
Bronze Member Username: Dave_kumarPost Number: 11 Registered: Aug-06 | any new kek for dn, i have a viwe sat 200 plat i have no picture |
|
Bronze Member Username: Dave_kumarPost Number: 12 Registered: Aug-06 | i mean 2000 plat | |
New member Username: BizwhizPost Number: 1 Registered: Sep-06 | I use my Dell laptop, serial port and null modem cable almost every day. It works fine. But I could not get the loader to see the VS2000 when I tried using my laptop. I rebooted, changed cables, checked device manager, etc. I tried the same cable on my desktiop computer and it loaded fine. When all else fails, try a different computer!! |
|
Silver Member Username: DjsmithCanada Post Number: 319 Registered: Jul-06 |
read |
|
Gold Member Username: EvadelparaisoPuerto Rico Post Number: 1980 Registered: May-06 | Astrovox 2600-Straight DB9 Blackbird and all Blackbird clones(BOB, Max 1000, Stealth II, MS1000, ,etc.)-Null Cool*sat 4000 Plus-Null Cool*sat 4000 Pro-Straight DB9 Cooltec-Null Coship (All)-Null Digiwave 6800/7000-Null Digiwave Diamond-Straight DB9 Dreambox (All)-Null Fortec lifetime-Straight DB9 Fortec Lifetime Ultra-Straight DB9 Lava 2600-Null Max 2500-Null ****sat (All)-Straight DB9 Microroyal (All)-Null Pansat 2300a/2500a and all clones-Straight DB9 Pansat 2700-Null Pansat 3500-Null Pansat 5000HC-Null(Also can program through USB) Pantec/Multistar Max (All)-Null Pantec/Multistar MS (All except MS1000)-Straight DB9 Pantec MX/Ultra-Straight DB9 Rex1-Null Silver bullet/ST 1000/2000-Null Skyview 500-Straight DB9 Spacestar DVB500-null Stealth 2000a-Null Ultrastar 5000-Null Viewsat VS2000-Null |