BEV TP's

 

Bronze Member
Username: New07fta

Post Number: 54
Registered: Apr-06
can anyone post a link to what channels are on each TP for BEV? thanks everyone
 

Bronze Member
Username: Letmeon

Post Number: 44
Registered: Mar-06
Blind scanz workwell.......
 

New member
Username: Jamalrahim

Post Number: 9
Registered: Jun-06
visit lyngsat.c*m for channel list
 

New member
Username: Iliu823

Post Number: 1
Registered: Jul-06
can someone help me to get all the bell vu 91w channels... i have a viewsat extreme receiver and use the 18" single lnb dual out put dish pointed at 91w with 75% of signal & quality. I had already input the bev 09 01 00 key with
Antenna setup
lnb power on
lnb type standard
lnb freq 11250
22 khz off
tp freq 1224
search option all
diseqc 1.0 port 4
motor off
legacy sw none.

then i did the blind scan, as a result i only get 294 wich including all the vu ppv(which is not working now). According to some previous posted which i should be able to pick up some adult channels like the, sexty , etc..
Is anyone know if i left out some step or it is the limitation on my box.. cause it seems all the tp frequency on 12341 V that i did not pick up.
 

Silver Member
Username: Abj

Post Number: 238
Registered: Feb-06
those channels blacked out last week.
 

New member
Username: Kashif

Post Number: 6
Registered: Jul-05
whats the best way to get 82W from 91 W
 

Bronze Member
Username: New07fta

Post Number: 55
Registered: Apr-06
thanks dudes for the help
 

Bronze Member
Username: Bouttep

Post Number: 17
Registered: Apr-06
I LIVE IN HAITI CAN I GET A SIGNAL FOR BEV

THANKS
 

Bronze Member
Username: Storyteller

Post Number: 15
Registered: Jul-06
Facing the dish, at the 91W light, take a left and go up and over 9 degrees..now you are at the 82W bird.
 

Bronze Member
Username: Bouttep

Post Number: 18
Registered: Apr-06
I LIVE IN HAITI CAN I GET A SIGNAL FOR BEV I HAVE A DISHMASTER 6 FOOT

THANKS
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us