Please Anybody Help Me with BEV

 

New member
Username: Aidyn

Post Number: 10
Registered: Jun-06
Hi Friends

I moved my dish DN 110 toward to BEV. I did blind scan but it says 0 transponder found. What to do. My Nimiq 91 setings shows the followings
LNB Type Standard
LNB Local Freq 11250
22KHz OFF
DisEqC OFF
Skew 45
TP [33] 12296
Position Setting Disable
Sattelite Scan ALL

Please Help ....

Thanks
 

Silver Member
Username: Abj

Post Number: 217
Registered: Feb-06
what type of receiver do you have?
what type of lnb do you have ?
what is your signal and quality level?
you need to be more clear.How many lnb are you using? Are you using disq. switch ? If so is it in the right port?
 

Silver Member
Username: Abj

Post Number: 218
Registered: Feb-06
change your tp to 12224. Go to antenna setting and highlight tp and move your arrow to right until you see 12224.
 

Silver Member
Username: Johnner

Miami, Florida

Post Number: 316
Registered: Nov-05
Justice let him search for answears all this has been said before.
 

Silver Member
Username: Abj

Post Number: 220
Registered: Feb-06
okay ....
 

Silver Member
Username: Abj

Post Number: 221
Registered: Feb-06
I am signing off for the night. Good night everyone ....
 

Bronze Member
Username: Momenali

Post Number: 88
Registered: Jan-06
You know an easier way i get signals such as Echo 110, 119, 61.5 and moree...
I use my original dishnetwork reciver...
Its much much eaiser and more clear then your pansat or C00LSAT or whatever...
When i get the signal from dishnetwork reciever, i unplug the Antanna wire and i hook it on my DBS....and There you go Full signal......
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us