Bronze Member Username: Kingyousuf786
Post Number: 14
Registered: May-06
|
Posted on Hi,
I have the pansat 2700a. All channels are working EXCEPT the PPV and XXX.
Is there a fix in place, like a new BIN??????
If so do i need to reset the Pansat then unzip the bin and install??? |
Bronze Member Username: Kingyousuf786
Post Number: 15
Registered: May-06
|
Posted on I have BEV
and i think there is a BIN 272???
if so can i know where yo get it from??? |
Silver Member Username: The_wank_artist
Post Number: 908
Registered: Feb-06
|
Posted on dsscentral*net.
In the pansat section.
register first if you haven't already.
And book mark the page as you can get any other file you may need later. |
Bronze Member Username: Kingyousuf786
Post Number: 17
Registered: May-06
|
Posted on so is it the BIN 272 i need???
do i need to a factory reset???? |
Bronze Member Username: Momenali
Post Number: 63
Registered: Jan-06
|
Posted on yes yes yes....yousuf, alselamo alicom
you do need to reset to factory first then flash the pansat with bin 272 |
Bronze Member Username: Kingyousuf786
Post Number: 18
Registered: May-06
|
Posted on salam
so do a factory reset
then power off and add the plug to the computer
then unzip and install.
then do the antenna and blind scan
right?????
did this work for you ???? |
Bronze Member Username: Momenali
Post Number: 66
Registered: Jan-06
|
Posted on yes you are correct.
but you dont really install, you upload the bin to the reciver using a GTRom uploader for your pansat 2700.
And yes all my dishes are working fine and well....good luck. |