|
New member Username: CoolguyfordishPost Number: 1 Registered: Jun-06 | Hello, I am newbie to cools@t 5k receiver. Please help me. I have a super dish pointing to 110, 119 & 121 satellites with DP34 switch and Cools@t 5K platinum Satellite Receiver. I am getting "No or Bad signal" error from the last 4 to 5 weeks. After troubleshooting with all the cables coming from dish to switch box (DP34), if I remove sat 121 cable then I am able to get the signal for other 110 and 119 satellites and I am able to see all movie channels (HBO, CMAX,..) and PPV's. If I connect 121 satellite cable to switch box then it is disturbing the other channels signals and I am getting this error. So I replaced the current 121-Satelite cable with brand new cable. I am still getting the same error. I am NOT able to see any international channels. Problem is NOT fixed even after updating cools@t 5k bin files (Ver 1.23), switching 121 to different i/p in the switch box, blind scan all channels, Delete all channels and blind scan, Delete all channels, reset the cools@t receiver to factory settings and then blind scan. PINS at 8282:- 10 --- AE F1 0F 87 F9 58 E1 55 11 --- 3A E4 8B AE ED DB BB DF 20 -- 71 9C 60 71 04 C1 39 AE 21 -- 88 FF F0 5E D2 4C F3 FC Can someone please help me how to fix this problem? Thanks, Coolguy. |
|
Gold Member Username: LklivesPost Number: 3206 Registered: Jan-06 | Those are wrong DN keys...10-11 are VERY old!...20-21 are current...and u also ned to recheck your receiver LNB/switch settings 10..E8 70 B0 0A 8E 0A 3D C5 11..F3 59 C3 5F 1A DA 19 5C |
|
New member Username: CoolguyfordishPost Number: 2 Registered: Jun-06 | LK, Somhow I typed the old DN keys. I verified the keys now and I have latest key settings. 10..E8 70 B0 0A 8E 0A 3D C5 11..F3 59 C3 5F 1A DA 19 5C 20..71 9C 60 71 04 C1 39 AE 21..88 FF F0 5E D2 4C F3 FC Here are my Dish settings:- 110 Satellite LNB power ON LNB Type OSC-DP LNB Frequency 11.250 22KHZ ON Diseq Switch 1.0 Committed 1 Legacy SW SW42 Dish1 119 Satellite LNB power ON LNB Type OSC-DP LNB Frequency 11.250 22KHZ OFF Diseq Switch 1.0 Committed 2 Legacy SW SW21 Dish1 121 Satellite LNB power ON LNB Type OCS-DP LNB Frequency 10.600 22KHZ ON Diseq Switch 1.0/1.1 Committed 3 Uncommitted 3 I tired all the combinations for LNB power, LNB Type and LNB Frequency. Still I am getting the same error. When I power on the receiver I see signal strength as 97% and quality as 91% for all 110, 119 and 121 satellites. After few seconds they are loosing the signal. If I don't connect 121, then signal is staying for 110 and 119. Please help. |
|
Gold Member Username: LklivesPost Number: 3213 Registered: Jan-06 | 110- legacy OFF 119- legacy off 121..LNB-standard, frequency 10750,uncommitted off/0 |
|
New member Username: RocksPost Number: 9 Registered: Jun-06 | LK help me get a file for coocoo 4000 pro |
|
Gold Member Username: LklivesPost Number: 3214 Registered: Jan-06 | try shutting OFF 22khz on 121...and/or make all 3 disque settings offor uncommitted..here;s mine..using a disque switch, no DP 3/4 switch... Satellite: ECHO 9(121) same as dish 105 Lnb type-Standard Lo freq-10750 22khz-OFF DiseqC- #1 Skew: O TP: leave it as is Positioner-Disable. Satellite: ECHO 6,8(110) Lnb type-Standard Lo freq-11250 22khz-OFF DiseqC-#2 Skew: O TP: leave it as is Positioner-Disable. Satellite: ECHO 7(119) Lnb type-Standard Lo freq-11250 22khz-OFF DiseqC-#3 Skew: O TP: leave it as is Positioner-Disable. |
|
New member Username: CoolguyfordishPost Number: 3 Registered: Jun-06 | LK, I changed 110 & 119 Legacy to OFF. For 121, I don't see LNB-Type as "Standard" I see the values Single/Universal/OCS/OCS-DP/Legacy Twin LNB 1/Legacy Twin LNB2/Legacy Quad LNB1/Legacy Quad LNB2. I have DP34 switch box. I changed the LNB Freq for 121 and Diseq Switch to 1.0 (from 1.0/1.1) to get Uncommitted setting and I changed it to 3 (Same as committed). There is NO 0 or OFF for uncommitted. With these settings before I connect 121 cable to switch box, I can see all 110 and 119 channels. Now I connected 121 cable to switch box then all the channels are gone with "Bad or NO Signal" message. Then I turn off the receiver with the remote and turn it ON. Now I see 110 or 119 channels for 3 to 5 SECONDS and then I am getting the same "Bad or NO Signal" message. I did try shutting OFF 22 kHz on 121 but NO luck. Also I don't see Skew, TP and Positioner. If I change Diseq Switch to any setting other than 1.0 or 1.0/1.1, I am NOT getting the signal at all. Please help. |
|
New member Username: CoolguyfordishPost Number: 4 Registered: Jun-06 | LK Or Anyone, Please help me in solving my problem. |