Sw44 setup


Bronze Member
Username: New07fta

Post Number: 38
Registered: Apr-06
need advice, i setup my SAM-44 switch. i have one cable that comes from 119 dual lnb. one eye with 2 output,(i m using only one output) goes directly to 18v port on the far left. samething with one cable from 110 dual lnb goes to port 13v, next to 119. is this setup ok. will it damage the switch or receiver. or could it be the cause of missing some transponders, 12370 on 119 and vod on 110.
i am saving the other 2 port for future dish
thanks in advance
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us