Archive through May 25, 2006
|
New member Username: Jam89Post Number: 9 Registered: May-06 | Hey, My dish just went out. I was using these keys: KEY00 E8 70 B0 0A 8E 0A 3D C5 KEY01 F3 59 C3 5F 1A DA 19 5C |
|
Bronze Member Username: SakapfetPost Number: 14 Registered: May-06 | me too |
|
Gold Member Username: Maple_leafPost Number: 1438 Registered: Apr-05 | 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC TRY THOSE |
|
New member Username: Palestine4everWaterloo, On Canada Post Number: 6 Registered: May-06 | oh ya me too |
|
New member Username: GadgetLajas, Puerto rico Usa Post Number: 2 Registered: Mar-06 | I need new keys. |
|
Silver Member Username: The_wank_artistPost Number: 429 Registered: Feb-06 | Wednesday, May 24 2006 at 6:48 PM -------------------------------------------------------------------------------- Dish Network: N 0101 00: E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C N 0101 01: 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC |
|
Bronze Member Username: AsharfiPost Number: 13 Registered: May-06 | Thanks Maple Leaf !!! The keys you told us, they're working! Thanks A Lot !!!!!!!!! |
|
Gold Member Username: Maple_leafPost Number: 1443 Registered: Apr-05 | Your welcome |
|
New member Username: HichamPost Number: 3 Registered: May-06 | this key is working 4 me,i have fortec ultra life time.  (00) 71 9C 60 71 04 C1 39 AE (01) 88 FF F0 5E D2 4C F3 FC |
|
New member Username: ChablizPost Number: 1 Registered: May-06 | thanks maple leaf... those worked for me! |
|
New member Username: YashmatharuBrampton, Ont Canada Post Number: 2 Registered: Feb-06 | how can I change keys in my Pansat 3000? |
|
Bronze Member Username: DellworkshopPost Number: 12 Registered: May-06 | DN KEYS AS OF 7:07 PM EST 00: E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C 01: 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC |
|
New member Username: Spring20003Post Number: 3 Registered: May-06 | thanx maple |
|
New member Username: RupinderPost Number: 5 Registered: May-06 | I have microyal 1200, where should i put these keys, help please |
|
New member Username: JeepguyPost Number: 1 Registered: May-06 | How do i change the keys on a cool-sat 5000? New to all this and on very very very slow dialup |
|
New member Username: GadgetPonce, Puerto rico Usa Post Number: 3 Registered: Mar-06 | new keys working thank you. |
|
New member Username: ZennPost Number: 8 Registered: Dec-04 | I am new to this so please bear with me wrote down the new keys from maple leaf I have a c**lsat 5000 and am receiving 110 only what do I do with the keys, I mean how do I install them into the c**lsat? do I reflash the receiver? I usually go to the newbie area on al7bar for these questions but the website is not responding |
|
New member Username: JeepguyPost Number: 2 Registered: May-06 | How do i change the keys on a cool-sat 5000? New to all this and on very very very slow dialup |
|
New member Username: TtopePost Number: 1 Registered: May-06 | Maple leaf's key is not working for me This is for nagravision, dish and I've fortec star lifetime classic, keys that I'm entering - 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC Please help, Thx in advance. |
|
Silver Member Username: The_wank_artistPost Number: 431 Registered: Feb-06 | How To Manually Enter N2 Keys For C*oolsats: ------------------------------------------------- Enter 8282 with remote as if choosing channel to open CAS Menu Use volume up and down button on remote to scroll to Nagravision ( Dish Network Provider Ident 0001 ) Use channel up and down button on remote to scroll to different Key Slot IDs and Key Slots. Enter the keys . Use the Info button for letters A-F . Press it once for A , twice for B , Etc and channel number key pad for number entries Or you can press OK and it will open a Keyboard selection type menu to enter keys. You will see the following Key Slots: 10 Key 11 key 20 Key 21 Key Post Edit: After testing I can confirm the bin editor will write to the bin with revised super bin version 1.0 and 1.1. The key slots used for N2 keys is the key slots 10 and 11. Tests of all 4 slots in various combinations reveal 20 and 21 slots have no bearing on signal decryption and correct keys must be inserted in the 10 slot for 00 key and 11 slot for 01 keys. I will note the bin will load the 00 and 01 keys duplicated within the 10 and 11 slots also appearing in the 20 and 21 slots. When key change is complete, Press Exit and confirm key change save. basically ..Idea key 0 on 10-11 lines, and Idea key 1 input into 20-21 lines. |
|
New member Username: PjbPost Number: 3 Registered: Apr-06 | i have a pan2500 and i chaged my keys today, the new ones i used are 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC, and everything worked fine, but my bro's pan2500 asks for 2 set of keys so i used Key 0: E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C Key 1: 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC but it didn't work.... anywho have anu ideas?? Pls and thanks |
|
New member Username: Bill1800Post Number: 6 Registered: Apr-06 | I have tried to download new keys and it is not working for my Ariza 700 any suggestions |
|
New member Username: AdilsonBrockton, Ma Usa Post Number: 8 Registered: Apr-06 | hay tyler i put the keys in and it works for about 3min then it rolls again and again and again. |
|
New member Username: ZennPost Number: 10 Registered: Dec-04 | Tyler: thank you thank you thank you thank you |
|
New member Username: SazPost Number: 2 Registered: May-06 | hi i have viewset 2000, i just enter the new keys , it works for 5 minutes then it goes down again...............same thing is happening again and again.....if any 2one can 2help me..... thanx |
|
New member Username: ChessyPost Number: 5 Registered: Jan-06 | turn your auto roll off |
|
New member Username: Bluerose8Post Number: 2 Registered: May-06 | Need help with cool sat 4000 Pro. is there a new code or what should i should getting message scramble channel. Thanks |
|
New member Username: Main420Post Number: 1 Registered: May-06 | i have CS 5000 platinum.....i did 8282 and entered the new keys, but not working...Am I missing anything? will it do autoroll, or do i have to do anything else? |
|
New member Username: 54321Post Number: 3 Registered: Nov-05 | I also have an Ariza 700 and the new keys will not work,,,i uploaded 274 but it still dont work. |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 2 Registered: May-06 | I have a Pansat 2500a clone and I was just wondering if anyone had the new keys for BEV.ANd also,how do I enter them?I know this sounds stupid of me,but my husband normally does this for me and he is out of town right now.THanks |
|
New member Username: DssdaisyPost Number: 1 Registered: May-06 | I have a fortec lifetime ultra, i have downloaded bin files in the past, and am not familiar with the key numbers. How do I use those keys?? I need help desparately.. |
|
Bronze Member Username: Bobbysteves6Winnipeg, Man Canada Post Number: 28 Registered: Jan-06 | These new keys work for bev aswell? |
|
New member Username: DssdaisyPost Number: 2 Registered: May-06 | What is autoroll? How do I input new keys instead of uploading bin files? I use the blacklist uploader, do you insert keys with it? |
|
New member Username: Destine1983Montreal, Quebec Canada Post Number: 3 Registered: May-06 | or even the new bin for Pansat 2500a clone.I need anything.Someone sent me the name of a new code which is X-85BL_060515_274T_RTN_TVE_4sec_au_api(N).bin but he didn't send me the file.So can someone please help me help my little girl watch her cartoons please? |
|
New member Username: MinicooperPost Number: 3 Registered: May-06 | I have a cool-sat 5000 for BEV and I entered the following keys: 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC It still did not work, can someone please help me out |
|
Bronze Member Username: Raging_fisherPost Number: 29 Registered: Feb-06 | Nobody can help you as of yet, we need to wait for a new fix. It's not as simple as a key change. Get use to it until we see a new bin, if it ever comes out. As I say that, my channels just came back on.... Beats me. |
|
New member Username: Rrobins9Las vegas, Nv Post Number: 1 Registered: May-06 | Hi I have a new fortec classic NA .Use DnUpMan v3.1 loader & bin file. The autoroll wont give me new codes. Do you have a bin file I can use for my fortec classic NA. Thank You |
|
New member Username: Bugster999Katy, Tx Post Number: 3 Registered: Dec-05 | On a 2700a how do you turn auto roll off? |
|
New member Username: Ahmad_assaadMississauga, Ont Canada Post Number: 1 Registered: May-06 | I need help plzz... all the channels are back except for the American ones .. anyone have any clue about whats happening here and thank you very much.. |
|
Gold Member Username: LklivesPost Number: 2711 Registered: Jan-06 | Dishnet Keys 24 May 2330 hrs Key 86(00): E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C Key 96(01): 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC ...(Active) |
|
New member Username: Roald13Post Number: 5 Registered: May-06 | those keys are not working for me...what should i do? |
|
Gold Member Username: LklivesPost Number: 2715 Registered: Jan-06 | Put them in correctly...these are CURRENT WORKING keys! |
|
New member Username: SaturangPost Number: 3 Registered: May-06 | u rockz mang |
|
New member Username: IdahospudPost Number: 1 Registered: May-06 | LK, I've only had my cools*t 5000 platinum for about a week. The last set of keys you posted were the ones on it when I went to change them. Do they need to be entered into the 20 and 21 keys? Thanks in advance. |
|
Silver Member Username: The_wank_artistPost Number: 442 Registered: Feb-06 | keys 10---Idea key 0 keys 11---Idea key 0 keys 20---idea key 1 keys 21---Idea key 1 Yes they do frank. |
|
New member Username: Ticat900Post Number: 4 Registered: Feb-06 | You people who supplied the new keys are great.Been hell with no TV for last 2 hours |
|
New member Username: Sm92325Tracy, CA USA Post Number: 9 Registered: May-06 | Thank you!!! |
|
New member Username: AggrofishPost Number: 1 Registered: May-06 | CS5K just hit 8282 to edit keys and ONLY EDIT LINES 3 and 4 and you'll be fine. line 3: 71 9c 60 71 04 C1 39 AE Line 4: 88 FF F0 5E D2 4C F3 FC fixed in 2.2 seconds |
|
New member Username: Djh88310Post Number: 1 Registered: May-06 | Hey does anyone know where I can download Key Master 2.0? |
|
Silver Member Username: The_wank_artistPost Number: 448 Registered: Feb-06 | John, I think you're daring people to try break your record of 2.2 seconds. Blue Ribbon for the first one to better Johns time.... |
|
New member Username: AggrofishPost Number: 3 Registered: May-06 | al7bar once the traffic does back down and you can get on there |
|
New member Username: Djh88310Post Number: 2 Registered: May-06 | Thank you, I've been trying to get in and my computer keeps telling me that this page can not be displayed |
|
New member Username: IdahospudPost Number: 2 Registered: May-06 | Thanks Tyler, They still didn't work until I hit the sat button and changed the sat to a single sat then back to all sats again. Odd. On a sort of off topic I have dish network and with my cools*t I am unable to get the local channels that I get with my subscription. Is there an easy fix to get them? Thanks again. |
|
New member Username: DonsboatPost Number: 1 Registered: May-06 | I have a 2500a with autoroll 2.74 bin have turned off autoroll and entered new keys do I need a new bin if so where thanx |
|
Silver Member Username: The_wank_artistPost Number: 453 Registered: Feb-06 | You do and you don't. You will need a new bin, but for now just manually enter the keys. do some research for your receiver and what the current bin is and then get it. But for tonight, no you don't need a new one. |
|
Silver Member Username: The_wank_artistPost Number: 454 Registered: Feb-06 | Frank, Have you scanned the tp's in your cools@? Many local changed tp's in late april / early may. Go here.... lists all the channels and which tp they would fall under. Then scan the tps that they are listed. Chances are you may have an old channel list in your cools@? |
|
Silver Member Username: The_wank_artistPost Number: 455 Registered: Feb-06 |  No one beat John Taylors time of 2.2 seconds. Blue Ribbon for you John!!!! (cheers) |
|
New member Username: DonsboatPost Number: 2 Registered: May-06 | My 2500a does not work with current bin when I manually enter keys. Should I try an older bin? thanx |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 443 Registered: May-06 | Schro check again your keys, turn off autoroll, scan all satellite. |
|
New member Username: AggrofishPost Number: 5 Registered: May-06 | cool deal I win the CS7K when is comes out right? |
|
New member Username: Main420Post Number: 7 Registered: May-06 | hey guys, i just got the DN. I had to go to manual scan to get the channels...you might want to try that. thanks for the key guys |
|
New member Username: Cosmic_rayPost Number: 1 Registered: May-06 | Hi ! This is fantastic...... I have Pansat 2700A, is it CLONE ? Secondly, I entered keys, posted earlier, start working, within minute or two agian lost everything ! Anyone help me? Thanks and regards, |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 451 Registered: May-06 | If do you have autoroll on, turn off. |
|
New member Username: DelishagPost Number: 1 Registered: May-06 | Hi, I have a c0olsat 5000 platinum and all my channels say scramble channel. does anybody know what Is wrong???? |
|
New member Username: Cosmic_rayPost Number: 2 Registered: May-06 | Thank you Eva, There are 3 Auto rolls, I turned "OFF" all of them. Leave the system ON to check how long it will last. Regards, |
|
New member Username: DelishagPost Number: 2 Registered: May-06 | Or how I can fix it. I have it hooked up to my pc now so if there is an easy way to fix it, someone please tell me. |
|
New member Username: AggrofishPost Number: 6 Registered: May-06 | delisha did you read this thread? |
|
New member Username: DelishagPost Number: 3 Registered: May-06 | what thread? |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 453 Registered: May-06 | delisha do yo need new keys, KEY Line 10 and 11 are for Idea Key 0 and Line 20 and 21 are for Idea Key 1 Dish Network: N 0101 00: E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C N 0101 01: 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC These keys was already posted by Tyler. |
|
New member Username: Bucky0696Post Number: 1 Registered: May-06 | How do you turn off autoroll on a pansat 250a? I also have a CS 5000, I have changed the keys there and I left the autoroll on and it is holding good so far, but I am afraid my 2500 will start rolling when I change the keys, I have had this problem before with it. |
|
New member Username: DelishagPost Number: 4 Registered: May-06 | I have no idea what i need. The only thing Ive ever done to the thing is turn it on and watch it.ha! I had bell vue & 119. thats about all i know. |
|
New member Username: Cosmic_rayPost Number: 3 Registered: May-06 | Bucky ! At page where you finf NIAGARAVISION2, at bottom update option, click and founfd new page contains autoroll options, turned them "OFF" |
|
New member Username: Cosmic_rayPost Number: 4 Registered: May-06 | EVA ! It seems to be working . Love ! |
|
New member Username: Bucky0696Post Number: 2 Registered: May-06 | mine doesnt give the update option, what now? |
|
Bronze Member Username: KumudiniaPost Number: 17 Registered: Apr-06 | How to turn off the autoroll in POansat 2550a? |
|
New member Username: Bucky0696Post Number: 3 Registered: May-06 | I am running the 273a bin |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 456 Registered: May-06 | bucky if your box do not have the autoroll off option rename the satellite for stop autoroll, enter the new keys, if you still have problems scan all satellite. |
|
New member Username: Nsanchez32Gurabo, Puerto Rico Uerto Rico Post Number: 1 Registered: May-06 | Hi, I have a viewsat 2000 platinuim,I missed the signal this night, I enter a new key and it not work. What I need to do. Did you had another key, please help me |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 460 Registered: May-06 | Noel check the autoroll and turn off. Check again the keys, scan. |
|
New member Username: MasterdavePost Number: 1 Registered: May-06 | thanks maple leaf those keys worked for me too |
|
New member Username: Bucky0696Post Number: 4 Registered: May-06 | can I rename them on the installation menu, if so, how? U r talking about renaming the 110 and 119? I have entered the keys and they have been running about 10 minutes now, so maybe they wont roll...just in case, please let me know exactly what you mean and directions..thanks Eva |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 462 Registered: May-06 | bucky rename the satellite for stop autoroll if your box do not have the option to stop autoroll. Menu, installation edit tp/satellite selec the satellite, enter, rename. |
|
Bronze Member Username: KumudiniaPost Number: 18 Registered: Apr-06 | Eva, Please tell me how to turn off the Auto roll in Pansat 2500a? |
|
New member Username: Bucky0696Post Number: 5 Registered: May-06 | Thanks for all your help Eva!!! |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 467 Registered: May-06 | You welcome. |
|
New member Username: LikoPost Number: 1 Registered: May-06 | i have an fortec lifetime ultra how to enter the new keys please help mee !!! i'm new too have mercy on mehh i got no tv !!! |
|
New member Username: MunabhaiCA, MN United States Post Number: 1 Registered: May-06 | How to enter keys in Pansat 2700a I am new to this first time I am experiencing this sat OUt, messsage says Wait for Picture |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 470 Registered: May-06 | ankito: Pansat: Press menu button on your remote: #1 Go to parental control... #2 Go down to "second pin" option & enter 0000 #3 Then go to nagravision 2 and select it by pressing ok button on your remote... #4 In Nagravision window you should be in the box that is Entitled "Provider ID"...scroll to the right (press right arrow button on remote) until it switches to Dishnetwork (00 01) #5 Now In Nagravision window go down (press down arrow on remote) to the box that contains "00" entitled "Key Number" #6 While in the box (highlighted "Key Number") that contains "00", scroll to the right until you see nagravision 2 at the top left of your screen #7 While in Nagravision2 you should still be in "Key Number" box and the number in that same box should be "00"...this is for Key 00 #8 Scroll down (press down arrow on remote) to key data and enter the new supplied key for 00 (within this site is the key change for Nagravision2)..take note on how to enter letters in the lower portion of the screen (ex. letter E=FAV button on remote) #9 Once key is edited select OK button on your remote (OK-STORE confirmation blinks twice in lower right of screen) #10 go back to the "00" box and move one click to the right which should take you to "01"..this is to edit the "01" key #11 Follow Steps 8 & 9 above (this time enter key data for key 01 instead of 00) #12 Click exit and click ok or yes to save changes then exit all the way out and you should be watching tv |
|
New member Username: Nsanchez32Gurabo, Puerto Rico Uerto Rico Post Number: 2 Registered: May-06 | Eva pero tengo una gran duda, y disculpa porq soy nuevo en esto. Apague el auto roll, que hago entro nuevamente el key y como lo scan. Yo lo entre en donde aparece nagra, y luego en el polsat, estoy right, gracias Eva |
|
New member Username: LikoPost Number: 2 Registered: May-06 | and for meh  PLZ HELP |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 474 Registered: May-06 | Noel do you need turn off autoroll check the provider id for BEV, enter the keys, and save. If you turn off the autoroll the satellite do not scan. Do you need enter manual keys for your receiver. |
|
New member Username: Playa2006Post Number: 5 Registered: May-06 | Echostar DishNetwork Last Update: 2006/5/25 1:08 EST Key 0: E8 70 B0 0A 8E 0A 3D C5 F3 59 C3 5F 1A DA 19 5C Key 1: Active 71 9C 60 71 04 C1 39 AE 88 FF F0 5E D2 4C F3 FC put in both |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 475 Registered: May-06 | Liko read at this link: https://www.ecoustics.com/electronics/forum/home-video/184799.html remember the id for BEV |
|
New member Username: LikoPost Number: 3 Registered: May-06 | THANK YOU EVA THANK YOU !!!!!!! MOUAHHHHH xxxx |
|
New member Username: Dc2Post Number: 3 Registered: Jan-06 | Dish has been changing the keys so much lately i wonder whats up? |
|
New member Username: DhloPost Number: 1 Registered: May-06 | Does anyone know how to enter the keys into my C00lsat 5000 Platinum? I haven't been able to find where that is! |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 478 Registered: May-06 | Strategy |
|
New member Username: DhloPost Number: 2 Registered: May-06 | Eva, Are you responding to my message or someone else's? DHLO |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 480 Registered: May-06 | Jason so sorry was to dennis. For you line 3: 71 9c 60 71 04 C1 39 AE Line 4: 88 FF F0 5E D2 4C F3 FC |
|
New member Username: LikoPost Number: 4 Registered: May-06 | Eva i typed (00)71 9c 60 71 04 c1 39 ae (01)88 ff f0 5e d2 4c f3 fc in Nagravision 1 and did a scan and still noting whats wrong ?? |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics