Cool*sat 5000 Platinum Auto scan issues

 

New member
Username: Scorp7

Post Number: 3
Registered: Mar-06
My autoscan/blindscan for 61.5W freezes in between and I can not get all the chaneels? Any suggestions?
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 277
Registered: May-06
Do you can delete all satellite and registry one to one. Scan one to one, saving one at the time.
and do you can rename satellite for stop autoscan.
 

New member
Username: Scorp7

Post Number: 4
Registered: Mar-06
Thanks Eva, I tried that too. apprently when I start with each frequency it just scans and gets few channels. Some of the frequencies do nto get scanned even though there is full signal strength. Any more ideas? Thanks?
 

Silver Member
Username: Evadelparaiso

Puerto Rico

Post Number: 283
Registered: May-06
Blind Scan Polarity should be in vertical only for DishPro LNB
 

New member
Username: Scorp7

Post Number: 5
Registered: Mar-06
Ok I tried that too keeping polarity as vertical only for blind scan and it gets stuck at 11.449 - 11.453 all the time for no apparent reasons. the quality is 97% at this point. Also there is no way to get out of the blind scan other then turn it off at this point. any more su=geestions please?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us