|
Bronze Member Username: Cincy_jugheadPost Number: 18 Registered: Apr-06 | can any one help point me in wright direction I need to know how to delet double chaneles thanks in advance |
|
Silver Member Username: The_wank_artistPost Number: 237 Registered: Feb-06 | Here is a link to the manual for your receiver. Please read it, maybe take it to the beach and work on your tan?? Pay particular attention to page 13 '5.3 How to delete channels'. http://fortecstar.com/Estore/store/Assets/userguide/65-userguide.pdf |
|
Bronze Member Username: Cincy_jugheadPost Number: 19 Registered: Apr-06 | thanks for all your help Tyler Durden have manual in front of me when go to delete only one channel shows up instead of 2 or3 channels |
|
Bronze Member Username: Cincy_jugheadPost Number: 20 Registered: Apr-06 | Tyler Durden read all the time do not post a lot most of time can find out by reading and dont have to post |
|
Bronze Member Username: Cincy_jugheadPost Number: 21 Registered: Apr-06 | Tyler can I set defalt key and rescan to take care of problem |
|
Silver Member Username: The_wank_artistPost Number: 240 Registered: Feb-06 | You could delete all channels and rescan, that would get rid of all the dup channels. If you had a channel list installed prior to deleting the channels they will not show up the same as they used to. As an example, my channel list has been modified using an external software program, so if I look at a channel say 100 on E*8 it says '100 Dish Info' or something like that. If I delete the channel and scan it back in it would just say 'HOME', or whatever it is. |
|
Bronze Member Username: Cincy_jugheadPost Number: 22 Registered: Apr-06 | Tyler thanks for all your help |