Setting up a third satellite dish

 

New member
Username: Moonlight

Post Number: 1
Registered: May-06
I have a pansat 2700A and it is receiving 121 and 119 fine. I use the pansat disequ switch that came with the receiver. I have 121 as #1 and 119 as #2. I recently got a third dish and pointed it to 110 and receive excellent quality. the problem is when I connect it to the disequ switch as #3, I will lost all three...I got the "no signal" message. here is my set up for 110
echo 8.6
lnb type: standard
lnb freq: 11250
22khz: off
disequ #3
skew -45
position setting: disable
TP(1)12223V20.00
I have always power off the receiver using the switch on the back of the receiver prior to connecting or disconnecting any cable from the disequc switch. the switch is brand new. thanks in advance for any advice.
 

Silver Member
Username: The_wank_artist

Post Number: 190
Registered: Feb-06
skew should be at 0.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us