|
New member Username: DghummanOntario Canada Post Number: 8 Registered: Feb-06 | can someone please tell me how to manually enter keys in Fortec star |
|
Bronze Member Username: Dafee99Post Number: 22 Registered: Apr-06 | https://www.ecoustics.com/electronics/forum/home-video/222768.html |
|
New member Username: DghummanOntario Canada Post Number: 10 Registered: Feb-06 | i tried puttin the codes 1010 and 1668 but it does not work so please help |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 156 Registered: May-06 | The step below are for Pansat & Fortec receiver with the new N2 Codes Only How To Manually Enter Keys For Pansats: 2500A & Fortec Ultra ------------------------------------------------ Menu button select Parental Controls 2nd PIN/enter 0000 Press set default keys Stroll up to Nagravision press OK button Press right volume button to Dishnetwork Stroll down to Key # Press right volume button twice. It should read ( 00 ) Nagravision 2 Stroll down to Key Data . Enter new codes. When finish press OK button to sore new keys Go back to key # Press right volume button one time . Key # should read (01 ) Nagravision 2 Stroll down to Key data enter second keys. When finish press OK button to store keys. Last step Exit Exit Exit . Go watch TV |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 157 Registered: May-06 | How to change the NAGRA2 Key codes (for Fortec Lifetime Ultra only) 1- Press Menu button on your remote control 2- Press right arrow key 2 times Channel Edit 3- Press down arrow key button 2 times, press OK (Code) enter 1010 4- Press the down arrow key to Set Default Key, click OK 5- Press the up arrow key to Nagravision click OK 6- On your top left you should see Nagravision-1...if not, then you've got the wrong BIN version. 7- Press right arrow key until you see Dish Network on top 8- Press the down arrow key once to Key Number 9- Press right arrow key 2 times the from Key Number 00 - 01 - 00 ( Now take notice that on your top left you should see Nagravision-2 now ) 10- Then press DOWN button key to change the keys manually on Key Number 00 11- Enter new Keycode, do the same procedure to enter the the keys on Key Number 01 Note: Satellite Providers changes the stream key codes unpredictably, (Note: remote control key letters equivalent) A = Sat, B = i, C = Tv/Radio, D = Pause, E = Audio (speaker), F = EPG 12- Check and make sure that you got all the keys....Press OK to store (save) 13- Press EXIT key 3 times to exit to the channels. Note: If you accidentally lock the KEYCODE (OFF) use this default password 1668 https://www.ecoustics.com/electronics/forum/home-video/184799.html |
|
Bronze Member Username: DghummanOntario Canada Post Number: 11 Registered: Feb-06 | i tried puttin 1010 it does not work nothing happens i cannnot go down to set default keys |
|
Silver Member Username: EvadelparaisoPuerto Rico Post Number: 162 Registered: May-06 | Do you used the default? do you can try put 0101 not 1010 |
|
New member Username: Gibbs912Savannah, Ga Chatham Post Number: 2 Registered: May-06 | i need help programming my fortec star what do i need |
|
Gold Member Username: LklivesPost Number: 2478 Registered: Jan-06 | Do not use Ulta bins and try to manually input keys...U can't.....use pansat 273T clone safe ultra bin and keys will autoroll into receiver.. |