My Pansat3500 loses DN after 30 seconds...

 

New member
Username: Sekator

Post Number: 10
Registered: Feb-06
Ok, I must be missing something simple here: I enter the new codes for DN for my new Pansat 3500...everything works perfectly (I did the Blind Scan, have all the channels).

But after about 30-60 seconds of viewing all the channels show up as scrambled again. I go to see the Nagravision 2 codes and they're changed on their own to something different than what I entered just a minute earlier...what the hell?

thanks for clearing this up for me...
 

New member
Username: Vapoc

Post Number: 3
Registered: May-06
Hello! I just entered into this Forum, I have a Pansat 3500S, and I would like to know if the keys for 2500S equipment will work for 3500S equipment. Also I wwant to download the autoroll bin for the 3500S, please advise what is the Web Page where I can find it. Thank's ahead!
 

Bronze Member
Username: Johnner

Post Number: 67
Registered: Nov-05
Tony>>>
Your answer is where you first asked:
http://www.dsscentral.net/indexa.html and look for 144T
 

New member
Username: Herm_the_sherm

Post Number: 3
Registered: Apr-06
johnner i have the same problem but i have a viewsat what should i do?
 

Bronze Member
Username: Johnner

Post Number: 73
Registered: Nov-05
look for the pansat 2500a file
this one is safe on clones too

http://www.clickspin.com/FTA_Down/X-85BL_060318_273_au_api(N).bin
 

New member
Username: Herm_the_sherm

Post Number: 4
Registered: Apr-06
johnner can i use that file on a viewsat 2000 platinum, it works fine on all channels except on the fight channel 455 and 456.
 

Bronze Member
Username: Johnner

Post Number: 76
Registered: Nov-05
Go and delete the channel on channel edit Menu then
Go to Menu.... Installation..... Advance Scan
and look for the TP 11797 (H) and rescan it.
 

New member
Username: Sm92325

Tracy, CA USA

Post Number: 4
Registered: May-06
I am having the same problem sekator
 

Gold Member
Username: Lklives

Post Number: 2425
Registered: Jan-06
If keys do NOT SAVE, which U should be doing...set default key...EMU ON...or rename the DN satellites....or go back an use NON autoroll bin....or many receiver have a way to disable the autoroll or simply turn it off (especially viewsat and c*oolsat)..read your manuals for your receivers...all DSS sites,evcept here have them!
 

New member
Username: Sm92325

Tracy, CA USA

Post Number: 5
Registered: May-06
LK, I do not have a manual. I renamed the sat. and still have the same problem. Do you know how to disable the autoroll on panset 2500a? Any help would be greatly appreciated.
 

Bronze Member
Username: Sekator

Post Number: 11
Registered: Feb-06
Yeah, I renamed my sats too, but to no avail. Still does not work...I was not able to find a 144T on that site, there is a 145, I presume I have to take that BIN file and upgrade my Pansat via a null-modem serial cable using the Blacklist Updater, correct?

Never done that before, but just from my research it seems to be what I have to do...pls verify, thanks
 

Silver Member
Username: The_wank_artist

Post Number: 167
Registered: Feb-06
Sekator,
https://www.ecoustics.com/electronics/forum/home-video/221275.html
Read this thread.
You'll be tested on it afterwards.
 

New member
Username: Sm92325

Tracy, CA USA

Post Number: 6
Registered: May-06
Just checking to see if anyone had new news for this problem.
 

Silver Member
Username: The_wank_artist

Post Number: 200
Registered: Feb-06
Jim, are you using a Pansat3500?
And do you have the correct bin installed?
Use the link just above your post.
You'll have to install the new bin, 145.
 

Bronze Member
Username: Sekator

Post Number: 12
Registered: Feb-06
Guys, I upgraded to bin 145 (was my first bin upgrade, so I am glad it went well). Put in new codes, all 100% good.

thanks for all your help! much appreciated
 

Silver Member
Username: The_wank_artist

Post Number: 227
Registered: Feb-06
Glad it worked for you Sekator.
Now go watch tv.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us