Just a question

 

Silver Member
Username: Analman_returns

Post Number: 200
Registered: Jan-05
what is the difference between a mikobu 1 and a mikobu 111
 

Gold Member
Username: Lklives

Post Number: 1632
Registered: Jan-06
2
 

Silver Member
Username: Analman_returns

Post Number: 201
Registered: Jan-05
all sh8t aside can you help. LK
 

Gold Member
Username: Lklives

Post Number: 1634
Registered: Jan-06
They are both old loaders/unloopers for DTV cards..difference is probably minimal..probably some slight improvement in case design or fixed dac settings..without having them side by side and disecting them, there is no way to remember the EXACT differences..what the hell difference does it make..no good now for anything....unless U want to mod a Mik 3 into an iso..
 

New member
Username: Terbok

Post Number: 1
Registered: Mar-06
Lk, which FTA receiver would you suggest to some one just starting out with FTA's?
 

Gold Member
Username: Lklives

Post Number: 1637
Registered: Jan-06
Depends upon their finances..Pansat 3500 or Coo*lsat 5000 are reasonable and very good..
 

New member
Username: Terbok

Post Number: 2
Registered: Mar-06
I did a search to determine the difference between the cool*sat 5000 and the cool*sat 6000 but was unable to find anything other than one is new than the other. Which would you recommend between the two? Your help is greatly appreciated.
 

Silver Member
Username: Analman_returns

Post Number: 202
Registered: Jan-05
can you make a mik 1 an iso loader
 

Bronze Member
Username: Cincy

Post Number: 17
Registered: Mar-06
HI JOE
I have c**lsat 5000 plat.
It has good guide and works well so far.
Had it about a month.
Info. is some what easy to get for it.
 

Silver Member
Username: Analman_returns

Post Number: 204
Registered: Jan-05
is my mikobo 1 any good or should i scrap it?
 

New member
Username: Terbok

Post Number: 3
Registered: Mar-06
thanks you for all you help alan engle
 

Gold Member
Username: Lklives

Post Number: 1710
Registered: Jan-06
scrap the Mik
 

Silver Member
Username: Analman_returns

Post Number: 205
Registered: Jan-05
i ask the guy that i got it from he says its a mikobu i, and its an iso loader is this true
 

Silver Member
Username: Analman_returns

Post Number: 206
Registered: Jan-05
this is the one i got any good


The Mikobu ISO Programmer is the best device on the market supporting both the 3.56MHz and the 3.68MHz crystals. This unit is the most advanced of its kind. its made from the highest quality boards and the most superior technology.

Product Features

* True universal ISO-7816 Compatibility
* Dual Crystal support for Dish Network
* Can be powered by the PS/2 port - Great for laptops.
* In a custom built Protective Case
* Designed by MIKOBU, one of the most respected names in the DSS industry
 

Gold Member
Username: Lklives

Post Number: 1764
Registered: Jan-06
If this is true, then U should be testing DN plastic..yes that is very good..
 

Silver Member
Username: Analman_returns

Post Number: 208
Registered: Jan-05
where can i get software
 

Bronze Member
Username: Wakenbake

Post Number: 14
Registered: Mar-06
you ask the guy
a,,hole
 

Gold Member
Username: Lklives

Post Number: 1767
Registered: Jan-06
Ecoustics...ban this clown wakenbake...all his posts are negative and trouble...he's kneegrows or his cousin!....If U are a mod, then START doing your job!
 

Silver Member
Username: Analman_returns

Post Number: 209
Registered: Jan-05
LK where can i get software?
 

Bronze Member
Username: Wakenbake

Post Number: 15
Registered: Mar-06
lk ,then keep on entertaining mr.ana1
 

Bronze Member
Username: Cincy

Post Number: 32
Registered: Mar-06
wakenbake

nothing better to do than pester people.
please go away
 

Bronze Member
Username: Wakenbake

Post Number: 16
Registered: Mar-06
answer the thread or STFU
U have nothing to offer
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us