Pansat 2700a with superdish.

 

New member
Username: Tim375

Post Number: 1
Registered: Mar-06
I have super dish I am still subscribed to D.N.
I am using pansat 2700a with 143 bin autoroll.
I didn't change the original switch from D.N.

When I programmed pansat, All I am getting are channels from 110. I am not getting anything from 119 or 121.

LK or some body please help me out

How to get channels from 119 ,121?.
Do I need to change the swich for that?.

P.S. : When I programmed I set default key on.
Will that be enough or Do I need to enter D.N. keys?

Thank you in advance,
Tim.
 

Silver Member
Username: Leew

Ketchikan, ALASKA

Post Number: 222
Registered: Jan-06
LNB ,SWITCH
 

New member
Username: Tim375

Post Number: 2
Registered: Mar-06
Do you want me to add the switch I got with pansat2700a?.
 

Gold Member
Username: Lklives

Post Number: 1231
Registered: Jan-06
How many LNB's on that dish ...U should have 3, and yes all 3 need to be connected aligned carefully at the 110-119-121, then cabled to a disque switch (remove DN's switch), and then a cable to your receiver from the switch....Then U must configure your receiver antenna and LNB settings...then scan the 3 satellites, upload the bin, set the default keys, watch TV..scan is best without the disque connected and cabled direcly from LNB to receiver..

These things are all FTA basic 101!!!need to read, so U can learn...cannot learn anything by just asking questions here..
 

Silver Member
Username: Leew

Ketchikan, ALASKA

Post Number: 223
Registered: Jan-06
I meaned = check setting .
 

Silver Member
Username: Leew

Ketchikan, ALASKA

Post Number: 224
Registered: Jan-06
If you want, I can send you pansat bible,it's for 2500 but you can use it for yours too. Just PM your E-Mail,
 

New member
Username: Tim375

Post Number: 3
Registered: Mar-06
where can I read FTA basic 101?.
 

Silver Member
Username: Leew

Ketchikan, ALASKA

Post Number: 225
Registered: Jan-06
so, you don't want my bible .Then you can start reading from "A" to "Z", or use GOOGLE.c om
 

New member
Username: Tim375

Post Number: 4
Registered: Mar-06
I want that.
Email addr is mcpetdog@yahoo.com
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us