Hey Vico; U will need another lnb to get all three. The easiest way is add another 18in. dish, single lnb aimed at 91w. You`ll have to read about the switch hook-up, I think there are some comments in some previous threads here.
I do get a signal on 91 with my current DP LNB. I also loaded a channel list with BEV channels on it. But when I try to view some of the channels I get bad channel or scrambled message on screen. I updated the latest BEV keys in the N2 screen. So I'm not sure why I can't view the channels on 91.
I also did a blind scan and it found lots of TP's but no channels.
Not sure ifvthats a bev bin or not...either way, upgrade to 270T autoroll with Bev and DN, then set the default key...keys will roll into place,watch TV...U will have to scan the satellites again,depending how many LNB's U have..and if U are aimed at 91 W and 110-119...which U would need 3 LNB's (eyes in front of roof dish)
Thanks, I will update the bin to 270T tonight. But I currently only have a dual DP LNB. Will that be enough to pickup 91? I do get a good signal on it now when I check the SAT button on my remote control.
The receiver will give U a good signal for all satellites,but it doesn't really know which one U are aimed at..
U can't have 110 AND 119 if U have a dual LNB...ONLY 1 satellite to 2 receivers..
U need 1 LNB per every satellite that U want to receve a signal from..
killd da pansat!!
Hi, since this seemed like a good thread for someone to help here goes: My friend recently purchased a Clone Pansat 2500a. He put my Pansat 2500a (original) bin into it. I told him that it would kill his box but he said to continue. Now his box freezes up. Is there any way to fix it?!?!? Please help so I can finish this off. Thanks