New member
Username: Ashkit

Post Number: 3
Registered: Dec-05
I recently bought a fortec liftetime ultra reciever and tried to hook up to a DTV dish which has ACER dual output lnb. I alinged and pointed the dish to 119 bird and ran the setup. My receiver shows 55% level and 0% quality. I tried aligning it at different angles and positions but still the same. Do I have to use any kind of switch or change some settings in antenna installation of the receiver or keep trying aligning the dish. Any help to resolve this will be highly appreciated.Thanks.

New member
Username: Tomuch4you

New yorkUsa

Post Number: 5
Registered: Dec-05
Iam using a DTV dish with a single lnb and my
fortec lifetime ultra receiver is working fine.

Also the person from whom I get my receiver
phoned me and told me that he now selling the
buzz box and I went to his store and he's
got about 10 fortec lifetime ultra receivers
that don't work. He told me that they won't take
the new bin file he put in them. This guy owns
a tv repair store. Will anyhow I told him that
I was using the 282t pin file and that dishnet
was working fine. He told me that I must have a
receiver that was made before 2004 or else it
won't be working. Sorry that I can't help you
more. Maybe Maple Leaf can help you out. Good
Did you try this sight-----dsste*
this is where I got my pin file.

New member
Username: Tomuch4you

New yorkUsa

Post Number: 6
Registered: Dec-05
@ ashkit, I think I know you, you work in
canada with a very, very good friend of mine
is name is Andy Cutrona. He did a deal with
me in New York and took of with most of the

Unregistered guest
i have an ariza 700 with autoroll 263 bin but i am not geeting nay pictures on bell 91 dish 110 and 119 are working fine. can somebody help please
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us