Pansat 2700A Flash Update Error FIX PROBLEM

 

New member
Username: 727pilot

SAN JUAN, PR PUERTO RICO

Post Number: 1
Registered: Dec-05
Cause of the problem is that the seriel port (COM1, COM2, COM3 , COM4) is conflicting with your MODEM or other divice. To solved the problem do this.

1. Get a computer with NO MODEM, NO SCANNER.
2. Copy the Pansat load programs.
3. Connect the seriel cable.
4. Execute the load program and start selecting
COM1, COM2 until you get the right one.

In some cases it could be the seriel cable. Replace with the correct one.

Good Luck!

 

New member
Username: 727pilot

SAN JUAN, PR PUERTO RICO

Post Number: 2
Registered: Dec-05
Also could be your printer conflicting with your seriel port (COM1, COM2) IRQ1, IRQ2, IRQ3.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us