Paging SpankyFTA & h3lt3r_sk3lt3r - BEST of the BEST


Bronze Member
Username: Barangay

Detroit, MI U.S.A

Post Number: 18
Registered: Oct-05
Please help my channels are messed up. it look like my 119 and 110 got combined. I'm on the SAT 119 right now and all the channels are scrambled from 1 to 239 channels but from 240 to 547 all are OK.

I used the new STB/BIN 20051108 and work fine but that's the only thing I did after the download to my receiver (C**lsat 4000). Should I do the channel listing too? Is that a file that I need to load also during the BIN/STB download?

Please help.

I have a TWIN LNB and I'm suing the DICSEQC 1.2 but it wotn work on me. I'm getting only one signal either 119 or 110. Please help


Silver Member
Username: H3lt3r_sk3lt3r

Post Number: 510
Registered: Oct-05

First of all configure your diseq settings on the receiver, if 119 is in the first input on your diseq and 110 is in the second, then on your receiver configure 119 to use diseq #1, 22khz to ON and 110 diseq #2, 22 khz to OFF. After you've done that scan each sat individually.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us