Before yesterday everything was working fine on my Pansat 2500a. Got all p0rn and plenty of pay per view. I was tinkering around with the menu when I accidentally deleted "factory setting". That deleted all of my channels. I wasn't too concern b/c I figured I could just do a "blind scan" and get all my channels back.
Here's the problem....
Only one satellite (Int-705/KU) has both the "level" and "quality" showing 99%. The other two satellites Echo 4 & 8 only shows 90% on the "level" but 0% on the "quality". These other two satellites were both working before I deleted "factory setting".
Nonetheless, I scanned both Echo 4&8 hoping to get channels. Got none.
I'm missing tons of pay per view and only p0rn is the rabbit.
Help!!!
Anonymous
Posted on
Throw the original factory bin on there,then the latest bin.Then do a scan and a receiver reboot. All should be good then.
I don't have the original factory bin but downloaded 2500A_040730_224_api(N).bin and flashed. Also, used latest file to get tv. Same result. No echo 4 or 8 satellite.