I read Turn on the switch correctly, and make sure the switch is on the correct #.
Can someone explain what this means. Diag aint the greatest. BIB.
h3lt3r sk3lt3r
Unregistered guest
Posted on
Here's an example with a Dish500 dual lnbf dish and a pansat 2700.
One lnb is pointing to 119 sat, the other lnb is pointing to 110 sat, you run one coax from 119 lnb into diseq's 1'st input and another coax from 110 lnb into diseq's 2nd input, then run another coax from diseq into your stb.
(Using pansat as an example) in the antenna set up menu, you'll see diseq setting and you'll be able to choose from #1-#5 or OFF, since 119 lnb is plugged into input 1 on diseq set 119's diseq setting to #1 and 110's to #2. If your dish is correctly aligned you should see quality level go up.