Problem withbin file loading

 

New member
Username: Korssane2000

Post Number: 3
Registered: Sep-05
hi guys,,
i still have prob with when loading any bin file
on my pansat2500A...i tried diff..loader.
but same prob message : write failed er1...
i checked my db9 cable and is wrkn correctly..

Any help will be appreciated..


K..
 

whatthefu..
Unregistered guest
i have the same problem...
with my pansat 2500a...
 

WEEIIRDD
Unregistered guest
have you tried to reset the receiver back to factory settings then flashing? Write Failed is typically the cable or the serial port. Try the 222 factory bin on 1500-2300-2500 updater to see if that works.
 

New member
Username: Korssane2000

Post Number: 4
Registered: Sep-05
yes friend,
I tried every thing ..cbale correct diff uploader..
tried factory 222 with factory uploader still
same prob.. write failed er1...

I don't know if it is time to jtag it.


K..
 

whatthefu..
Unregistered guest
i fear that it may be the cable on mine,
i had to get a converter to use my printer port
that doubles as a Com port to use the rs232.

can i use a usb to rs-232 cable instead?
 

WEIRD
Unregistered guest
Try different com ports also, sometimes that fixes it.
 

New member
Username: Korssane2000

Post Number: 6
Registered: Sep-05
i tested db9 cable and was ok...

tried all com ports ..but got same error message :

write failed er1.

It looks like a trial software that u can use for
limited times...i can not access the receiver..


K...

 

pamijo
Unregistered guest
I am having the same problem with my lifetime ultra using the 281 bin and also with the 282. tried all com ports and cables fine...any suggestions? using blacklist 1.3
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us