Techsat sep16 beta n2 bin at ___al7bar<tk............ working great(little freezing on some channels]I had to search each transponder to get all channels.
Ok the long awaited tech sat files are posted . This is a beta test only! We have ran it and there is nothing that can harm your tech sat . It gets the majority of channels fine. Please remember that this is the first crack at it for the n2 on this techsat reciever . It has been tested on 110 and 119 as that is the only birds i have hooked in mexico. Now as you all know there is an update to the blue jay and it is posted as well if needed. I have been running this for a bit and notice the occasional freeze but nothing major that quick power of and on doesnt fix .This will occur when trying to burn through the the channels at full speed. Guess im spoiled by the blue jays blistering speed. Please note that everything will be tested and corrected as needed. Points to Remember load the main then the key file ( use lemon from the tools folder) lemon is the ones with lemons in the picture for tech sat ( limes are on the blue jay lemon program) Then make sure you go into the menu and initalize the reciever to switch it onto the new software . Your will need to scan again, then VERY IMPORTENT. go to a channel and get no service message then turn OFF power switch on the back then on . DO NOT touch anything on the remote except for punching in the number 5400 ( like the old days). Once the picture comes on do power off and on again and it is unlocked.
Must register...Free site..remove the * in .T*K in link above...that is direct link to these files.
MMMMMMMMMMMMMM
Unregistered guest
Posted on
Ok the long awaited tech sat files are posted . This is a beta test only! We have ran it and there is nothing that can harm your tech sat . It gets the majority of channels fine. Please remember that this is the first crack at it for the n2 on this techsat reciever . It has been tested on 110 and 119 as that is the only birds i have hooked in mexico. Now as you all know there is an update to the blue jay and it is posted as well if needed. I have been running this for a bit and notice the occasional freeze but nothing major that quick power of and on doesnt fix .This will occur when trying to burn through the the channels at full speed. Guess im spoiled by the blue jays blistering speed. Please note that everything will be tested and corrected as needed. Points to Remember load the main then the key file ( use lemon from the tools folder) lemon is the ones with lemons in the picture for tech sat ( limes are on the blue jay lemon program) Then make sure you go into the menu and initalize the reciever to switch it onto the new software . Your will need to scan again, then VERY IMPORTENT. go to a channel and get no service message then turn OFF power switch on the back then on . DO NOT touch anything on the remote except for punching in the number 5400 ( like the old days). Once the picture comes on do power off and on again and it is unlocked.