This is the way I have my 2 dishes setup for my Fortec Ultra Lifetime: LK or someone who has 110/119/61.5 working!
----119--- Ech0* 7 On diseqc set to # 1 Lnb power - On Lnb type - Single Lnb freq - 11.250 22khz - On Diseqc - 1.0 Lnb # 1
----110--- Ech0* 6,8 on diseqc set on # 1 Lnb power - On Lnb type - Single Lnb freq - 11.250 22khz - Off Diseqc - 1.0
On DTV set to Diseqc to # 2 Lnb power - On Lnb type - Single Lnb freq - 11.250 22khz - Off
I only get 61.5 signal on Disqec #2 Everything was detected and worked fine independibly, but when i connect both dishes to switch only 61.5 works. Can you or someone re-verify the installation.