Does someone knows how to unlock the Panasonic RV32 EG-K ??

 

I just purchased a Panasonic DVD player RV32 EG-K which is intended for region 2 DVDs. Is it possible to unlock that one ? I would like to order DVDs in the USA ;)
I found on http://www.qxl.com/cgi-bin/home/qxlhome.cgi/EN/QXL/PR/Q1018233901/_40276710/SR12-36-0E25A627A00293/#itemdescription someone who claims to be able to do it for 1.5 £ but you need to register at XQL first and that requires private information ...

Any tip will help !!

Thanks in advance

Ronny
 

I have the same problem. Pricerunner.se claims that it should be zone free, but it isn't. Ronny, have you heard anything more?
 

www.multi-region.co.uk, will unlock your Panasonic DVD RV32 @ a price of £54.99 as it is a hardware hack. I am curently looking at this problem and this is the cheapest solution so far - Will keep you posted
 

I have the same problem as yours, but my dvd is Panasonic DVD S35, i need to unlock this to region 4 (Brazil). What can i do? Is possible to unlock panasonic´s dvd by control?
 

Anonymous
Best solution: buy a region free DVD player. I got one of the newest models from China, with surround sound system, Component output (even progressive scan), for $80 U.S.
 

I have Panasonic DVD-CP72P - K DVD player. I purchased it in USA. I need to unlock it for the region 5 (India). Any solution please?
 

SRK
Hi at all! Look at this:
1. Email or write to Panasonic service department and ask for the DVD service Disc No.2 all the info is supplied.
2. It doesn't tell you what it does but the codes turn your player into multiregion.
3. For disabling Macrovision follow the same steps and replace code 3192 to 3193 after you have done the multiregion upgrade.
4. Note This discs works with the new RA players as well.
So it works!
 

I have the elusive srvice disc (DVD). It unlocks Panasonic players RV-31/41 PV40 LV60 RA61/71 HT70 AND the DVD LA-95.

Also unlocks Technics 250 280 and 600 series.

Also removes Macrovision.

Plaayer MUST be region 2 in order to be converted.

Cost is £30 inc P&P
 

Please help me switch DVD-RV32 into region free mode. If someone know how to do it please send me a message on my e-mail: Irq11@poczta.fm thanks!!!
 

Someone knows how unlock the panasonic dvd cv-290 or sc ht-290d for region free.
thanks.
 

parasite_eve@citiz.net tanks:)
 

Anonymous
What about RV-32? Does the service disc work in that too?
 

Anonymous
I know that I'm a middle-aged accountant so tech things are beyond me ~ i just put a USA DVD into it and pressed "play"..... lo and behold it did. It is a bog standard Curry's buynowpaylater Panasonic DVD-RV32 and we play back on a Panasonic TX-28PL10 which plays back PAL and NTSC.
 

help
i need to unlock an australian
panasonic rv32 dvd

anyone have the code

thanks
 

I also need to unlock a region 1 panasonic RV32. Can anyone help out? I'm desperate!
 

can anyone tell me how to view
my photos disk on my panasonic RV32
 

yep ive got a rv-32 region 2 needs unlocking anyone help? please!
 

Anonymous
Found this on a site i visited may be of help
The DVD Upgrade is an advanced modification to your DVD player, which adds extra features and enables you to get more from your machine. The upgrade supplements the DVD player and in no way harms the playback quality or removes any performance features of the machine.

Players Supported

The following DVD players are supported by this version of the DVD Upgrade:

Panasonic HT70
Panasonic RV26 / Panasonic RV31
Panasonic RV36 / Panasonic RV41
Panasonic RV56
Panasonic RA61 / Panasonic RA71 / Panasonic RP91
Panasonic PV40 / Panasonic LV60 / Panasonic LA95

Macrovision & CGMS disable

All DVD players have a system called Macrovision built in to the player, which is designed to stop the copying of DVD discs to video. However, this system can have adverse affects on some projectors. For this reason the DVD MOD Upgrade disables Macrovision to solve any problems.

Region, features selection

The region switching works automatically for almost all DVDs. MP3 Playback is enabled by this modification. Press the following buttons while the player is powered ON. Power off and then power on your machine again. Default Regioncode is 1.

Remote control command Function
[1] [SELECT] Region 1
[2] [SELECT] Region 2
[3] [SELECT] Region 3
[4] [SELECT] Region 4
[5] [SELECT] Region 5
[6] [SELECT] Region 6
[7] [SELECT] Region 7
[8] [SELECT] Region 8
[PLAYMODE] [1] [SELECT] Default Auto switching ON
[PLAYMODE] [0] [SELECT] Auto switching OFF
[SUBTITLE] [1] [SELECT] Enable video interference impulses (Macrovision ON)
[SUBTITLE] [0] [SELECT] Default Disable video interference impulses (Macrovision OFF)
[AUDIO] [1] [SELECT] Default MP3 playback enabled
[AUDIO] [0] [SELECT] MP3 playback disabled
[ANGLE] [2] [SELECT] Default Initial video mode does not change
[ANGLE] [1] [SELECT] Initial video mode NTSC
[ANGLE] [0] [SELECT] Initial video mode PAL
 

anybody know how to hack a panasonic sa-ht500?
 

Anonymous
does anyone know how to unlock a Technosonic dvd802c
 

any body knows how to unlock a toshiba dvd player so i can play dvd from south america- colombia
 

newcastle
does any1 know how 2 unlock panasonic s75 please?
 

Mr david norman
Need to play pirate dvd on technics any ideas how to do this
 

Help !!! Need Unlock DVD Panasonic DVD-S35 for region Europe
 

Anonymous
Service disc is the only way to unlock Panasonic players.....full stop.
 

Anonymous
Bought a panasonic SA-HT500. Was advertised and were told by sales staff that it was multi region. However when playing region 1 dvd it says it is incompatable. Does anyone know the codes for this dvd theatre system?
 

Anonymous
is it possible to copy the service disc #2 into DVD+R and still works as original disc ?
 

Anyone know how to switch (ou unlock) a region 1 panasonic rv-20 to region 4? Thanks.
 

Anonymous
Hi,

I think we have to differentiate between the "european" RV32 an the USA-Version...

Look at this:

http://www.dvdrhelp.com/dvdhacks.php?select=Panasonic+RV32

http://www.electronic-devices.com/DVD_tools.htm
 

http://www.zeropaid.com/news/articles/auto/11232003a.php
please install this program,its like kazza
then in the search field type in "service disk"
then theres some files about 3.9 gigs or four smaller prassi image files, this will unlock your
panasonic rv32 dvd play and remove the macro detecting so you can play you burned dvd-r
movies,i need these files and cant download it with my conection speed please email me if
you can burn me a copie of these files
im at tnewcamp@sympatico.ca
 

Does anybody know how to unlock a region 1 panasonic SC-HT700 DVD to multiregion?

Thanks
 

Anonymous
 
Has anyone worked out how to make the Technosonic DVD802C player Multi Region.
 

Anonymous
 
I HAVE THE DVD-S35 BUT IS NOT READIND DISCS.
INSTEAD IS GIVING ME THE CODE H O2, SOMEONE CAN TELL ME WHAT IT MEANS.
PLEASE
THANK U
 

Anonymous
 
please somebody find out how to make the technosonic dvd802c multi region!! thanx all
 

Anonymous
 
look at www.regionfreedvd.net for dvd player hacks.
 

Unregistered guest
Hi I have a sa-ht500 dvd player and I want to play region 1 on it!
can anyone help me please.
thanks
 

Unregistered guest
i have a panasonic 5 disc dvd player SA-HT80 will the service disc make it all-region? currently it is uk region 2. if so where do i get the disc frm?
 

Unregistered guest
I have Panasonic SA-HT500, please help me to crack it.
 

Unregistered guest
Does anyone have any info on how I can unlock/make my Panasonic DVD-RV60 player, play cd-r,cd-rw,dvd-r and other non original discs? I would think it was a firmware or something similar. My player is modified so it takes all regions.
thanks
 

Unregistered guest
Hi, I have codes to multi-zone most DVD players. I charge $5 for code. Need make & model of player before I can confirm player can be coded. Chip instructions for non-code models can be supplied.Please email if interested.
 

Unregistered guest
can anyone help me to unlock my panasonic dvd-la95 please. I travel a lot and need to be able to play region 1 & 2 discs.
Many thanks
 

Marco
Unregistered guest
I've just purchased an S35 DVD player and there is no response when I hook up the machine. The power turns on but nothing else works. Any suggestions?
 

Samal
Unregistered guest
Hi,

I just purchased one Panasonic SC-HT700 system in US and want to play region 2 and 5 DVDs. I called up service and they could not help. Can any one supply me a tested code/firmware, I can pay if cost is reasonable.
 

JohnnySummers
Unregistered guest
Can the Technosonic DVD 802c be made region free?????
 

Unregistered guest
I have a Panasonic S35 which is already Multi Reginal.
I want to unlock Macrovision, Can this be done with service disk, or do I need to install a third party adapter?? Pls help.
bernaul@tpg.com.au
 

delboydavies
Unregistered guest
try www.dvdcodes.net, they seem to have all the answers
 

Unregistered guest
Hello everyone,
Can you please tell me how to make my DVD Panasonic NV-VP30 multiregion?
thanks a lot for yor help.
Javier
 

Unregistered guest
does anyone knows how to unlock Panasonic SA-HT80,to play non original discs? PLEASE HELP
 

Unregistered guest
does anyone knows how to unlock Panasonic DVD S27?
 

Anonymous
 
Testing Please Ignore
 

Unregistered guest
Does anyone know how to unlock a panasonic S35 to play region 1 DVD.

Thanks in advance.
 

Unregistered guest
I have a Panasonic RV-31 (region1) player..does anyone know how to unlock it.. I really need this dvd player to play region 1 and 2 discs.

thanks.
 

firefly2k3`
Unregistered guest
Any hacks for SC-HT670?
 

Unregistered guest
I am looking to make my Panasonic SC-HT700 (USA Region 1 model) multi-region. Can anyone help?
 

Unregistered guest
HI ALL, DOES ANYONE KNOW HOW TO UNLOCK MY PANASONIC RV32, AS I WOULD LIKE TO PLAY REGION 1 AND 2 DISCS IF YOU COULD HELP PLEASE EMAIL ME,THANKS NATHAN.
 

Anonymous
 
hello - does anyone know how to make my dvd panasonic s27 multiregion???
 

Anonymous
 
you can rent the appropriate upgrade disc or remote control to convert all panasonic players from www.dvdchips.co.uk
 

Unregistered guest
Hey - does anyone know how to unlock a Panasonic SA-HT80?
 

Unregistered guest
Hi

I have a Panasonic SA-HT80 and I it is not multi-zone (so can;t watch almost all DVDs I hire). Can somebody tell me how to make it multizone?
I purchased the machine in Australia.
Thanks
 

Unregistered guest
Hi,
Can you please let me know how do I unlock my Panasonic F-61A 5 disc DVD player (which is region 1) so that it can play any Region's dics.

Thanks.
 

Unregistered guest
does anyone know how to make the panasonic rv-32 multizone? or just how to switch zones? thanks.
 

Maxx
Unregistered guest
I Have The Same Problem With the Panasonic SA-HT80.
I did read something about an DVD service Disc No.2 that is available at Panasonic.
I am going to mail that party about this.

GrTz
 

Unregistered guest
How to make my, Panasonic S35, DVD player to play DivX?
 

thunder
Unregistered guest
please help me i need the codes 4 a sa-ht80 panasonic dvd system as i can not watch dvd it keep saying no play can not play this type of disc please help thank you
 

Anonymous
 
Can anybody tell me how to make my Mitsubishi DVD work in both Region 1 and 4?
Mitsubishi DVD model DD-6050.

 

Unregistered guest
can anyone help me please, i have a panasonic SA HT80 and i can not play cd's which i burnt on my pc. Is there a fix for this? it is soooo frustrating.
 

Silver Member
Username: Samijubal

Post Number: 445
Registered: Jul-04
Try burning slower, or different media. I have a Panasonic DVD player that doesn't play computer burned CDs, does play CDs burned on a standalone though.
 

Unregistered guest
please, let me have a FREE way to unlock my panasonic rv32 european! thanks a lot
 

Unregistered guest
I just purchased a Telefunken DVD player TDV75000 which is intended for region 4 and All DVDs. Is it possible to unlock that one? I would like to use DVDs from region 1.

Any tip will help !!

Thanks in advance

 

Anonymous
 
This is for Panasonic players only. Don't hyjack the thread and start asking about other brand name units.
 

Anonymous
 
I need to unlock my Panasonic S-35 DVD player. Can anybody help? Thanks
 

Unregistered guest
I need the panasonic SC-HT670 region free or region 4 any one knows how to do it. ?
Thanks!!
Please mail me.
 

Unregistered guest
im trying to find out how to unlock my panasonic [ S35 ], if anyone has any codes, they would be greatly appreciated, thanks

bruce
 

New member
Username: Abellah30

GenevaSwitherland

Post Number: 1
Registered: Dec-04
Dear All,
I have A DVD-RV 40, it is multizone and is great but it does not read \CDR or DVD-R.

Is there a firmware update that enables reading CD-R and DVD-R. Is there a way to change this
 

New member
Username: Abellah30

GenevaSwitherland

Post Number: 2
Registered: Dec-04
Dear All,
I have A Panasonic DVD-RV 40, it is multizone and is great but it does not read \CDR or DVD-R.

Is there a firmware update that enables reading CD-R and DVD-R. Is there a way to change this
 

Anonymous
 
By the sounds of it, your player is physically not able to play it because it doesn't have the other laser to read R/RW discs(twin lasers) which players typically use today.
 

Anonymous
 
http://www.panasonic-remote-hack.co.uk sell a remote to convert panasonics
 

Unregistered guest
Panasonic DVD combi NV-VP30EB. Has anyone got the unlock code please.
 

Anonymous
 
Hi guys" those who are asking for help"

May be I can help in decoding most of the DVD players from A-Z only.
Please feel free to email me westy_boyz@hotmail.com.

Cheers
 

Unregistered guest
i have a panasonic dvd player RV-32 model which is on region 2 how do i make it multi regional
 

Unregistered guest
I have a Panasonic DVD player RV-32 model which is on region 1. How do I make it regional free?

Thanks
 

Unregistered guest
I have a Panasonic DVD player RV-32 model which is on region 1. How do I make it regional free?

Thanks
 

Unregistered guest
I have a DVD player RV-32 model on region 4. Anyone can help me? Panasonic authorized stores can help me?
 

Unregistered guest
It appears after some research that the only way to make a UK RV-32 region free is to get a hacked or original service remote. Has anyone tried hacking the standard remote ?
Any answers to crack this problem let me know.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us