Help please, DiSEqc switch problem

 

New member
Username: Jays247

Post Number: 1
Registered: Jan-05
I have a DiSEqc switch, I am using two dishes, 1 is pointing to echo6/8(110) and the 2nd is pointing at echo7(119). Im using a Fortec lifetime Ultra rec. Now the only sat I can view is the one that is plugged into LNB#1, the error on the screen is no signal. Can someone help me out please, Thx.
 

Silver Member
Username: Jmill1948

Chester, Va Usa

Post Number: 539
Registered: Apr-04
Check the disque setting in the options.........
 

Unregistered guest
I recommend you to change the positios in the connector...
This is....instead No. 1 to 110
and, No. 2 to 119, change it No. 2 to No. 3 in the Diseqc and that`s it.
If you still having problems, first you have to test each LNB directly to your system (without switch).
Good luck
 

New member
Username: Sal24

Post Number: 1
Registered: Feb-05
I have a RCA dish with 3 LNB integrated..
Can I use it with the new fortec 2500 lifetime to get the two signals (110 and 119 d.) at the same time or I have to use the switch...?

How...cause I already connected but only one signal is received...
 

tom w
Unregistered guest
Can someone tell me what is the differance between a 1.0 switch and a 1.2.....sw21-sw34
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us