What is the ultimate setup

 

New member
Username: In4ni

Post Number: 1
Registered: Feb-05
Getting ready to make my first FTA purchase.
What is the ultimate hardware setup to be able to receive maxinum channels. how bout a dish500 and a 30" with with a motor? Will that combo work?


thank you
 

New member
Username: Wyrtwister

Post Number: 5
Registered: Feb-05
Two ways to go . Put a DVB-S PCI sat card in your computer or buy a FTA receiver ( Pansat 2500A or a Fortec Ultra ) .

If you are using a motor , there is no need for a twin LNB .

If you want true FTA , you need at least the 30" dish & a linear Ku LNB .

If you want to " test " DN & BEV , put an old 18" DTV dish & LNB on the motor .

If you want both , strap a DTV LNB to the side of the 30" dish & linear KU LNB . Use a Diesque swirch .

Wyr
 

LK
Unregistered guest
I'm hearing very good things about the coolsat over the pansat...Much faster and EPG working very soon..many I know have both...all prefer the coolsat
 

working EPG
Unregistered guest
Coolsat 4000 has a working EPG

http://www.gosatellite.net/coolsat_4000_plus_1579_ctg.htm


 

New member
Username: In4ni

Post Number: 2
Registered: Feb-05
Sure is amazing how off subject these threads get
 

LK
Unregistered guest
Actually this thread is Exactly on subject,unlike most other threads..
 

New member
Username: Wyrtwister

Post Number: 6
Registered: Feb-05
Is the EPG on the CoolSAt on DN or BEV ?

What is the coast of this IRD ?

Does it use Pansat or Fortec flashes ?

Thanks ,
Wyr
 

LK
Unregistered guest
has its own software...prices vary based upon dealer..220-280...EPG software release this week..
 

Anonymous
 
Wyr wait for the new model release Coolsat PRO march 1'st it's much better and a supposed epg release on Saturday. weel see...
 

Bronze Member
Username: Allic

Post Number: 13
Registered: Jan-05
A fortec with multi dish is the best!
We have the best deals on the Fortec
 

JayBeeZee
Unregistered guest
can anyone tell me if the coolsat 4000 pro can receive bev.... ty
 

LK
Unregistered guest
Bev/bell has NOT changed Keys since November 2003....and I have posted those keys here at numerous places..also KEY changes APPLY to ANY FTA receiver...all the same,make-model makes no difference

Current BEV/ Bell Keys
AUX0 is active, changed Tue Nov 18 20:00:00 2003
AUX0: 82 D7 51 E4 5B 97 9D 81
AUX1: 65 57 46 14 36 02 D8 DA

The Dishnetwork Keys work on ALL makes/models of FTA receivers...Pansat..Fortec etc..

Current Dish Keys
KEY1 is active, changed Thu Mar 17 17:00:00 2005
KEY0: F0 C9 59 D8 7F 8D 34 13
KEY1: 0B 51 9E B7 EB 20 E7 4D

BTW...here's where/how to get and use BOTH the Pansat 2500 and 2700 autoroll bin v245,which does work..its in this linked thread below..READ!

https://www.ecoustics.com/electronics/forum/home-video/127878.html

If missing channels after a Key change install,..always shut power OFF on BACK of receiver,unplug,wait 1 minute,plug ,turn back ON..if that doesn't fix it,then do a AUTOSCAN (or can add new channel list using Gtools 1.86) via the remote in your installation setup again.
 

JayBeeZee
Unregistered guest
i have a coolsat 4000 pro and when i look in my list of satellites it only has two both dish net sats but not bev how do i get more sat choices on that list
ty again
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us