Problems routing VCR/DVD to VCR

 

New member
Username: Visviki

Post Number: 2
Registered: 02-2004
I am having problems hooking up a VCR/DVD player with a seprate VCR connected to a DDS receiver. The sat line comes into the VCR and then goes to the DVD/VCR. The TV and DVD/VCR are new Toshiba's. DDS receiver and VCR are Sony. I can get the Sony VCR to play and record. The Toshiba DVD/VCR only has sound on the DVD side no picture, on the VCR side nothing. This is a brand new unit. The routing map for Toshiba is different in the two manuals, TV and DVD/VCR. The reason I am wanting to install the seprate VCR is so I can record off of the DDS system by using Sony's S-Link feature. The Toshiba would have to have the station pre set and you could only record on that station. Both the Toshiba TV and DVD/VCR state you can set up two VCR's but their routing maps are not the same. The DVD/VCR will play when only connected to the TV.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us