Sanyo PLV-Z2 & Pioneer DV-575A-s *FAULT*

 

Anonymous
 
Hi guys,

I have the above equipment connected as follows..

DVD to Projector via component cable.
DVD set to Progressive / Widescreen.
Projector set to Progressive / WScreen.

All this worked fine for several weeks until I played a DVD-A.

Since then, the image on normal DVD has been split 3/4 of the way down by a black line, below the line the first 1/4 of the image is repeated. I assumed that this was a Progressive scan problem, not so, because when the image size is altered to 'Full through' the image is fine and when the Pr'gsve is is set wrong the projector just displays the blue screen.

Will a 'hard reset' cause any harm / can anyone suggest a fix?

Cheers.

 

Anonymous
 
Hi there, i have the same problem, and picture seems to be jumping if set to progressive.

Seems there are more users experiencing the same problem and they all have firmware 1.08 (so do i).

Which firmware are you using?

/Sami
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us