Automatically adjusting between HD and Digital sound when watching Directv

 

New member
Username: Boricuatec

Emeryville

Post Number: 1
Registered: Feb-09
Hello all!

Here is my situation. I have HD Directv, when watching HD I have to adjust the volume, then when a commercial comes on its too loud and I have to turn it down, and when HD comes back from commercial, I have to turn it up again. This is a royal pain! HELP!!!!!!!

I have a AVR-2307, Directv is plugged in via HDMI.

Thanks much
 

Silver Member
Username: Jrbay

Livonia [Detroit area], Michigan USA

Post Number: 704
Registered: Feb-08
Greetings Luis,

Contact Directv (1.800.DIRECTV) and complain. They are the ones allowing the advertiser to increase the audio gain to get more attention.
 

Silver Member
Username: Mccambley

BREEZY POINT, NY USA

Post Number: 596
Registered: Jun-05
Blaring commecials are a problem for all of us this is not a direcTV problem. In some of todays newer receivers they are using a Dolby Lab device to maintain the volume at all times. These are some links dealing with the problem.
http://www.hometheatermag.com/news/082408loudtvads/index.html

http://hometheatermag.com/news/050608toshiba/

http://www.dolby.com/consumer/technology/dolby-volume.html
 

New member
Username: Rmammerschuber

NY USA

Post Number: 5
Registered: May-06
Can't help but wonder where the FCC is on this issue? Another government agency asleep at the wheel? While they're at it maybe they should look into those radio commercials featuring sirens too??
 

New member
Username: Boricuatec

Emeryville

Post Number: 2
Registered: Feb-09
Thanks to those who responded! I thought this was going to be something easy, oh well!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us