Sony ht-k25 'unlock' message

 

New member
Username: Scottjords

Post Number: 1
Registered: Jan-08
Could someone please help.
I have been using my sony ht-k25 home theater unit for some time without any problems.But now I get the message 'unlock'when trying to use on the dvd setting.It works fine on the tv and satellite settings.
Any ideas?
 

New member
Username: Jrbay

Livonia Detroit area, Michigan USA

Post Number: 6
Registered: Feb-08
Sony has made up it's mind which input you should be using and locks out the others. from Sony:

The word UNLOCK may appear in the display if there is a problem receiving a digital audio signal. Follow the steps below to troubleshoot this issue.

1. Ensure the correct input is selected to receive the Audio/Video (A/V) from the appropriate source.
2. Ensure a digital cable is connected to appropriate DIGITAL jack.
3. Ensure the other end of the digital cable is properly connected to the A/V source.
4. Ensure the A/V source is set appropriately to output a digital signal.

NOTE: The A/V source may have a DTS setting that needs to be turned on, or a DPCM setting that needs to be set to Dolby Digital.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us