hi how can i fix the night rider light problem i have a converted flu to pansat 2500 or 2700 i am not 100% but it doesnt have the b75 bin installed thanks please help
You will need to do a forced boot flash! Basically follow this:
1. Power Down and disconnect STB. 2. Connect STB to your PC 3. Open BL Loader 4. Open Bin File to Load 5. Click Download to commence File Transer. 6. Immediately turn STB on from Rear
DO NOT interrupt the process until download is complete.
YOU WILL see a message at the end of the download saying "Burning". Do not be alarmed, this is normal.
Once the download is complete, your stb will reboot itself. Power down STB from rear and reconnect to your TV.
I CANT DO THAT CUZ THE LIGHT ARE FLASHING OVER ...... ALSO MY OTHER RECEIVER ALSO PANSAT 2700 JUST DIED AFTER I LOADED BIN286 FEW DAYS AGO ANYONE KNOW WAHTS THE PROBLEM THERE.....IT WAS WORKING AT FIRST AND THEN IT JUST STOPPED
Your gonna need to know if b75 was loaded on that receiver and then load then follow what I told you to do earlier. As far asthe one not working, sounds like you need to jtag it. This is because it may very well have been a clone and you loaded a file intended for an original and not clone.
i am pretty sure that b75 was not loaded on the receiver..i tried to load it but it didnt work..or maybe i had the wrong boot file waht do i do thanks for ur help
just load CanAm-Puff_253_640 K) (load this bin when the KR are running) wait untill you see PUFF running on the led That mean "converted to PUFF." then load last bin 286 PUFF when PUFF are running, (no turn off receiver Do as PRFRMNJ said to download the files, but use BL 1.40 loader
