hi i have 3 dish with dual lnb each one for bev one for 61.5 and one for 119-110 i was wondering how can i have this 4 sat working on my 3 receivers(1view ultra and 2 flu)which diseq should i use and would it work with sw64??? please let me know as i didn`t buy my switchs yet many thanks. I READ THAT SOME SWITCHES THEY DON`T WORK IF YOU HAVE BEV AND 61.5 ON THE SAME MULTIPLE SWITCH IS THAT TRUE PLEASE LET ME KNOW WHAT IS BEST WAY TO DO IT MANY THANKS....
- Zinewell 6x8 can do the job no external power required - SW-64 is just good for 3 sats & 4 receivers but it requires seperate external power source so annoying if yo don't have a near by P/S - DP34 is OK however it will need a 1000mA current 20Watt receivers only DN go that high none of the FTA receivers can do Many people attach an old unused DN receiver to generate that 1-Amp Current
FTA is one thing pay service is another But I would pick the 6x8 switch as a better choice
King Tapeman you say that Vertical polarity only from Sat-2 The drawing of the Zinwell 4x4 Multi Switch shows Sat-2 connected to the 18 volt port. 18 volts is for horizontal polarity, and 13 volts for vertical polarity. Please correct your post.
African DP34 won't work without a 1000mA power source (1Amp) He must attach a seperate receiver to generate enough current
Like I said above Zinewell 6x8 will be yor best option plug and play type of switch When yo share multiple satellites on a switch designed for 2 satellites one polarity will over-ride the other Usually is 18V parallel with 13v will produce 18V so as yo change thru the channels polarity struggle will take place as all recivers on at the same time
The wiring I got here will improve sharing but maping the 22k on all 4 receivers will be a challenge for any one with no electroncs background
So save yorself a headache or try to understand this maping: Now this is just an idea Improvement can be made cuz this is an improvised sketch that I just came up with for non-motorized fixed satellites
Hello i try to conect to recivers one dish so i bought a dp34 switch after i cont to it i lost most off chanels and in some i have bad or no signal can someone explain me why is this do i need anoher switch ?
but King Bin is the same tha i had the chanlas wher working but whn i conect dp34 switch its not the same as without the switch i so your post up somthong abput dp34 not good bether the ZINWELL so u think i should order this switch or dp34 will work? i have a Magnum and a Pansat 2700
Yor problem requires factory default and rescan channels This has nothing to do with either type of switch The right thing to do is create a new thread list yor hardware and I will help yo
