|
New member Username: Crazydoo67Post Number: 3 Registered: Mar-08 | I followed Plymouth's instructions from yesterday re: All viewsat box Go to Code menu Select Nagra and on Dish 01 06 00 Dish 00 01 00 dish 01 01 00 Delete this 3 provider one by one with F3 on remote no need to delete keys switch off 10 secs on back panel and load last bin for your box turn autoroll on Keep on Bin and autoroll regenerete keys Resolve problem with lost channel , autoroll, freeze and search signal Thats erase bad data in the box For box who lost channel and sat setup ENJOY TV It didn'twork..I"m still unable 2 get any channels after that darn blindscan..and I have the new file for Mar. 28/07..this has never happened.. can anyone with any expertise help..I need BEV and the foreign language dishnet 2 work..thanks |
|
Gold Member Username: NydasPost Number: 9617 Registered: Jun-06 | If you have both DN and BEV, you have to scan BEV first and then DN. |
|
Gold Member Username: Saqeeb9000Post Number: 2981 Registered: Oct-07 | tell us channels name .. u can do a mannual (advance) scan where u can add tp/freq... |
|
New member Username: Crazydoo67Post Number: 4 Registered: Mar-08 | Nalin, Do I have to do an autoscan after the blindscan? |
|
New member Username: Crazydoo67Post Number: 6 Registered: Mar-08 | Nalin...it keeps automatically blindscanning echostar 3 before it scans Nimiq 1,3 (bev)... |
|
Gold Member Username: NydasPost Number: 9632 Registered: Jun-06 | Your antenna settings must overlap. I am signing off now. Post all your antenna settings and your physical set up and tomorrow I might be able to look at it. Anyway, somebody else might see the problem and be able to help. |
|
New member Username: SidxxPost Number: 1 Registered: Mar-08 | hi where do i get viewsat ext fix pls |
|
Gold Member Username: Saqeeb9000Post Number: 2983 Registered: Oct-07 | [link removed] |
|
Silver Member Username: LuserPost Number: 167 Registered: Nov-07 | Check antenna settings lnb type=your type freq=11250 22hz=off lnb=on If you have switches for multi sats or 2 lnbs in one casing you will need diseq or sw ports to corispond. Most important is to get good quality of the 2 signal bars and that the name of the sat your receiving signal from is displayed in the upper right and should match that of the one on top settings list. The quality will increase as settings change to the correct ones. Autoscan or channel scan do not blind scan do not mess with keys. Make sure autoroll is on auto tp is off. Most everything being told is BS from retards or for other old receivers and doesnt apply to viewsat. Its always simple like connect cable. |
|
Gold Member Username: PlymouthQuebec city, Quebec Canada Post Number: 1359 Registered: Jan-08 | Read it: https://www.ecoustics.com/electronics/forum/home-video/466791.html |