|
New member Username: TheanswerPost Number: 1 Registered: May-06 | so theres two satelites for dishnetwork. One that I have only gives mostly South Asian channels, plus some asian, Arab and alittle american, plus two PPV. Nothing special. Theres a 2nd dish you have to get to view all the paperview and xxx channels. Anyway is it possible to view any of the xxx channels with just the first dish, or does it not carry them? just wondering..... |
|
Gold Member Username: LklivesPost Number: 2320 Registered: Jan-06 | U are in left field...all your info is wrong...U need to read for a MONTH.. |
|
Bronze Member Username: Gold__lionPost Number: 37 Registered: May-06 | get a new channel list... cof cof cof cof |
|
Gold Member Username: LklivesPost Number: 2322 Registered: Jan-06 | bad info..do not use any channel lists now! |
|
Bronze Member Username: Gold__lionPost Number: 39 Registered: May-06 | shut up lk, how do u know if u havent tried it? im tired of u i know ur really good at this, but get past that cloud of smartness and think on da light side for a bit... sheesh! look ill show u an example go to ur box: g4tech tv satelite 7ku transponder 12411 on this channel list im posting g4tech tv satellite 7ku transponder 12414 works!!! all da damn channels work, even da sport ones... |
|
Silver Member Username: The_wank_artistPost Number: 118 Registered: Feb-06 | Isn't it past your bed time Eungene? |
|
Bronze Member Username: Gold__lionPost Number: 42 Registered: May-06 | nope :P and its eugenio XD but yea man do w.e u guys want it works for me and i probly wont b back here to try and help cus ppl are freakin morons sometimes.... nite |
|
Gold Member Username: LklivesPost Number: 2329 Registered: Jan-06 | Changing TP's are happening again. Noticed that some PPV channels were not showing up with programming in the EPG, ie 514, 515 on Echo 8.6, and sure enough, they were blank channels Solutions (saved the best for last. - do what works for you!!): First try turning the receiver off and on, using the switch at the back, not the remote. This re-sets the computer - quick remedy, just in case it's not a TP changing problem. If that does not work, then: Use an updated channel list If none is available, which is what I expect to be the case, then you have these options: Nuke all channels and Blind scan the sat(s) again. Blind Scan Polarity should be Vertical ONLY for DishPro LNB's Note: On the missing or blank channel, press the OK button. At the bottom of the pop up screen you will see the sat and the frequency for that channel. Make a note of it. Now, go into the TP Scan, TP selections. You will note that the EXACT frequency for the missing channel is NOT listed. It's close, but no cigar. Therefor a normal TP scan will MISS the channels. The TP scan will not find the changes because the frequency is not that of the listed TP frequency, It's just a bit off and that means the channels will be missed during a TP scan Setting Default keys again, will also NOT bring in the TP changes. Hint: every time I scan, I start with a different sat and save to SD after each sat scan. This way, I can choose the 119 and 61 combo as the starter CH load and just scan 110. Saves time in the long run. Just remember to delete any old saved combos that includes the newly updated sat. BUT THERE ALSO IS AN EASIER WAY!! - WITHOUT NUKING CHANNELS!! First, on the channel that says no signal, hit the OK button and write down the frequency of the changed TP and which sat it is on . ie: TP 12600, sat echo 8.6 Go to installation menu and choose Advanced Scan In the top row, manually enter 12600 as the frequency Go down below and highlight Video PID Press OK, wait for scan to finish, some 16 channels will show up in the above example, exit to programming and all will be fine...NO DUPLICATES EITHER!! Now this is the long read to the solution, LOL, but it's gonna take you a lot less time to read and do it than it took for me to try and discover all these solutions - so that I may guide you to which way is best - and hopefully, you've learned something along the way |
|
Bronze Member Username: Sam111Post Number: 11 Registered: May-06 | careful with that axe Eugenio ........AAAAAAAAARRRRRRGGGGGHHHH!!!!!! LMBO |
|
New member Username: Impala1977Post Number: 1 Registered: Apr-06 | Hint: every time I scan, I start with a different sat and save to SD after each sat scan. LK what does SD stand for? Appreciate the help. |
|
New member Username: VapocPost Number: 1 Registered: May-06 | Hi! I am just entering to this forum, I have a Pansat 3500S, could you please advise if the keys for 2500 equipment are the same for 3500S equipment? Also please advise where can I download the autoroll bin for 3500S equipment. Thank's in advance |
|
New member Username: VapocPost Number: 2 Registered: May-06 | Hi! I am just entering to this forum, I have a Pansat 3500S, could you please advise if the keys for 2500 equipment are the same for 3500S equipment? Also please advise where can I download the autoroll bin for 3500S equipment. Thank's in advance |
|
Bronze Member Username: JohnnerPost Number: 66 Registered: Nov-05 | Read first! https://www.ecoustics.com/electronics/forum/home-video/221536.html |