Cut & Paste ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Borrowing from the still active N1 stream to pull the continuously changing Control Words and plugging them back into the now 'black' N2 channels is hardly an N2 hack....this is nothing but an enhanced N1 emulation trick.
When the N2 conversion is complete and the N1 data stream is completely turned off there will be no way to decrypt the control words without a dump of a Nagravision 2 conditional access module (card or chip-on-board).
Free to No-Where is hardly a viable solution to N2. I predict card cloning will be the only viable solution, and that won't happen until after the new cards are dumped......and of course that won't happen unless some major industrial espionage happens like last time.
There is no hack for any N2 smart card anywhere in the world but while the upgrade is being performed and both N1 and N2 coexist it is possible to 'fool' your receiver and substitute the control word using an N1 based device.
Try this with an older receiver (Baker series, 2000, 3000 and 4000 series).....Load a Rom 2 card with a subscription bin....set your receiver to a fully working N1 channel....then set your receiver to 'black/muted' N2 channel....use the
Recall button on the remote a few times.....eventually the receiver will glitch and the N2 channel will come through for a few seconds....
In an upcoming receiver firmware upgrade which will be released when the N1 stream is retired, a number of routines will be executed to validate the presence of a genuine smart card and its embedded software. The receiver will disable itself
(subject to a hard reset) if an emulator or an invalid smart card is used. This should make 'testing' a frustrating nightmare.....
Channel Tiers on N2 cards are only pre-enabled for 4-6 weeks in advance.....DeSub Blockers or the practice of subscribing then canceling while storing your receiver for a couple of months won't work.
Without a dump of an active N2 smart card it is impossible for any receiver including a generic MPEG-2 receiver (like a FTA unit) to emulate and decrypt the data stream with any kind of reliability.....
FYI......Reverse DCT does work with conditional-access-limited MPEG-2 data but it takes about 30 seconds to rebuild a group of pictures that are inter-frame related....this technique would work with any so-called 'encoded' MPEG-2 video
since the art is not Control Word based but it is slow since it is based on macroblock regrouping. It is completely ridiculous to suggest that any device other than a valid N2 smart card is capable of decrypting the N2 data stream....unless such a claim is supported by evidence or some reasonable basis.....a concert of anecdotal claims such as those purported on various chat forums hardly qualifies.
I've stated previously that the present so-called N2 hack is nothing more than a revised N1 emulation technique whereby the control words are being borrowed. I provided a real world test that anyone can conduct to confirm my statements. This is precisely the trick....and its nothing short of a scam to suggest otherwise.
The only lost souls 'pushing' free to air receivers are rogue dealers trying to unload a bunch of soon to be obsolete inventory on a bunch of misinformed consumers who are 5 years late for the party....which has now ended.
If that is true explain to me why am I wathing PPV in N2????? here in europe they change there N1 to N2 almost a year ago??????
Gr Richie
N2 is open rom101 and is is not a hoax. The story above here comes from the N2 it self to scar people off.
Anonymous
Posted on
No S_it I've seen this post here by LK? (maybe, who knows)? and at several others sites!!! Screw cutting and pasting this again people, please...
n2 not hacked
Unregistered guest
Posted on
I don't think that the n2 in europe is the same as the n2 thats in north america so as far as n2 been hacked in NA we'll have to wait and see.
del sol
Unregistered guest
Posted on
is there a new auto roll for the ultra life time
i am only getting a few channels
Anonymous
Posted on
You're not the only one that having this problem. Charlie just hit so all FTA's are experience this now. No P0rn, no PPV, PPV sport, who knows what else.
Anonymous
Posted on
Hey, The Sun...We're all in the same boat, or haven't you read the latest posts? N2 went down today for everybody!
del sol
Unregistered guest
Posted on
ok that makes me feel better
is there a fix out there
LK
Unregistered guest
Posted on
Latest news: Sept. 13 2005 The Nagra2 FTA Hack goes down At about 2:00 pm EST today all free-to-air Nagra 2 channels went down. according to popular belief the po* rn channels went through a key that was changed on those channels on Aug 30-ish,Now the rest of the Nagra 2 channels have began using the same key (which is not decoded or available like the old N1 keys), which are not working with FTA receivers. The test is now on, to see how fast they can fix this (or update the key change) some are saying "end of days" others are saying "end of today" we will see as the whole world is watching now.
My dad lives in CA still watching everything incl. the PPV with his DB500, People if you have the right software then you still have picture.
N2 in Europe is the same as in the US, N2 came from the US and I have still watching all the PPV, sport, on this site in N2 signal.
Gr Richie
LK
Unregistered guest
Posted on
No more fix for fta... sorry guys...
Soung Hi Young Dong Fong
Unregistered guest
Posted on
OOO WTF man!!!! wasted all my money on the reciever i just got today!!!!!!!!!!!
Anonymous
Posted on
Lk I think personally you don't know anything about the Hack of rom 101 you try to act really big that it is coming from yourself please stop trying to piss people off at this form and Anonymous same to you.
LK
Unregistered guest
Posted on
Cannot write a bin without the keys or access to the keys..and the coders don't have any way to get the N2 keys ....and this alogrithm story is pure BS to buy time for the coders who don't have a clue what to do now...sorry,but I believe FTA and N2 are dead in the water..Plastic is the future..
Dishnet has changed all channels to N2 keys now...previously they were N1 keys (except for po*rn, some sports and few others which were N2 keys,thats why U couldn't get them)...U could get most of the channels cause they were N1 keys,but NOT now...everything is N2 keys,which requires a dump which hasn't been done by anyone yet..
BTW...rom101 hack is dying,not working for most know after paying big $$$$...there was never a dump!...U need to undertand many things obviously..
and the Dreambox is NOT a hack...its card sharing,like file or sub sharing!
LK
Unregistered guest
Posted on
giver Honoured Guest Join Date: Jul 2005 Posts: 53
Well,so much for "coders only need emm/ecm" stuff,they simply won't respond because they can't,they'd be embarrased they can't support their products without a "magic" release. This was said before:they have nothing and it shows,now more than ever. Their chance is now,that keys have entered the stream and are available,but them coders "don't have emm/ecm" to begin with. Their excuse is "they change the algo",which is also BS,only a way to "make time" while they wait for a saviour to pop up from nowhere. Even when people know 'n2 is in the bag",and in fact have it all going,it don't seem to apply to FTA makers. They can't support their product anymore,they'd have to pay BIG bucks for dump to do this. And they are NOT doing it.
LockSmith
Unregistered guest
Posted on
Not suggesting that this may be easy but how hard is it to get the new keys? What would have to been done? How was n1 keys available?
LK
Unregistered guest
Posted on
New N2 keys are like cracking DTV cards..
LockSmith
Unregistered guest
Posted on
If n2 has been hacked in europe for over a year now then its only a matter of time
Anonymous
Posted on
boy... really hard to get straight answers here.....was just at tiki..some guy says it's now working on dvb cards....what is the truth?
Digi68
Unregistered guest
Posted on
Hi Richard Hart, if you can watching all PPV, can you send us the keys. Thanks
You want me send you a picture of all the PPV I receive? N2 is still open you have to have the AU key otherwise NO picture. You can find it at many sites but you have to know where I don't give keys or illegal files away you have to get it your self. Files in europe for N2 works allso in the usa, so long you have the right Images, Config and AU keys. I have a DB 7000 and my dad has a DB 500 which I personally reprogram the Images with the right config and keys. I use flashwizard pro (ftp) is fast and never fails me.
Gr Richie
Prove it!
Unregistered guest
Posted on
Whats the link CLAY???
LK
Unregistered guest
Posted on
yeah I can send U a picture of PPV too...from my sub card!
==If n2 has been hacked in europe for over a year ==now then its only a matter of time
Last year N2 was hacked but not for the public just a few weeks ago N2 Rom101 was given to the public The N2rom101 had some flaws at this moment in Europe people are watching PPV in N2 with the same keys what the USA are using with the RIGHT Images, Config and AU keys you will get picture in the USA, but who cares about picture now we need to pay attention to the rom102 and 103.
Gr Richie
Anonymous
Posted on
SCAMMER!!!!!!!
Prove it!
Unregistered guest
Posted on
Why does he not post the link?? I know CUZ HE IS FULL OF 5HIT!!!
goto dsscentral net and latest files for Pansan N2 files. Works for new key after 09/13/05
DEL SOL
Unregistered guest
Posted on
THE FILE # 279 FOR THE FTA ONLY ONPENS UP A FEW CHANNELS ANY ONE HAVE A BETTER FILE FOR THE FORTEC
THANKS
DEL SOL
Unregistered guest
Posted on
THE FILE # 279 FOR THE FTA ONLY ONPENS UP A FEW CHANNELS ANY ONE HAVE A BETTER FILE FOR THE FORTEC
THANKS
F U LK
Unregistered guest
Posted on
LK was dead wrong, they are all working again....
Anonymous
Posted on
hello,
absolutely frustrated with all this technical jargon. Does anyone have the file for the fortec lifetime reciever so i can watch the international channels.
Thanks in advance
Anonymous
Posted on
Just wanted to let you know that the rom101 will be released to the public soon. You will be able to program your own rom101 cards.
Where u Been
Unregistered guest
Posted on
Just wanted to let you know that the rom101 will be released to the public soon. You will be able to program your own rom101 cards
the complete dump was released 2 weeks ago on a couple euro ftp servers
Where u Been
Unregistered guest
Posted on
Just wanted to let you know that the rom101 will be released to the public soon. You will be able to program your own rom101 cards
the complete dump was released 2 weeks ago on a couple euro ftp servers