New member
Username: Anik9k

Post Number: 1
Registered: Oct-07
HEY EVERYONE FIRST POST HERE. so i was wondering i have got 110/119 setup right now with an sv4000 and VS2000Xtreame right now. they are both connected via 2 diseq switches. i want to replace my VS2000 with an SVelite and i also want to use its dual tuner capabilities. what switches do i have to use to get these 2 receivers running. my understanding is that u need 2 physical lines from the dishes for dual tuner since diseqs are 4x1 and u can only get twin lnbs. any suggestions here guys.

New member
Username: Anik9k

Post Number: 2
Registered: Oct-07

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 3303
Registered: Jan-08
Here is the good way to connect your 3 receiver(3 tuner on 2 receiver)

Keep this diagram, if you want add LNBs and 1 more receiver


Use 1 multiswitch and 3 diseq

Gold Member
Username: Donnie1973

Post Number: 3051
Registered: May-06
cut that in half for just the 2 recievers, or get a quad dp lnb, would be sooo muc=h easier.1 wire to the sv 4000, 2 to the sv elite. the elite is awesome.

New member
Username: Anik9k

Post Number: 3
Registered: Oct-07
thanks guys. this quad lnb u speak off... is it mountable on an 23" eliptical dish.

Bronze Member
Username: Justforhahas

Post Number: 44
Registered: Jul-08
Yes the Dish Pro (DP) Quad LNB (made specifically for 2 sats 110-119 or 82-91 to 4 receivers with a built in external switch) mounts fine on the 23" elliptical dish.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us