LNB for 118 & 119 change?

 

Bronze Member
Username: Fortec16

Post Number: 93
Registered: May-06
I have 121W now with the 33'Dish. If I wants to change to 118 & 119.
Q1) I have to buy the Duel LNB or single LNB?
Q2) What is the name of the LNB?
Q3) I live in Scarborough, Canada. Where should
I get a good price?
Q4) Can I change it myself?
Q5) Is any setting after I install the LNB?

Please kindly answer all questions, its also helps others.

when is SUNTV moving from 121w to 119W?
 

Bronze Member
Username: Andreasmith

Post Number: 37
Registered: Mar-07
Sun is not moving to 119w. i believe the same is moving to 118.7

That requires a circular lnb. I am waiting for nalin on the NEWKEYS Thread.

Andy
 

Gold Member
Username: Nydas

Post Number: 4794
Registered: Jun-06
set your 119 lnb circular first and then remove and replace with your new digiwave-1189D LNB .

now go to channel scan and find E*7 and add one tp from 118
tp freq- 11715 V
S/R - 200000
fec - 7/8

exit and save ,

setup your LNB :

119
ON
Universal
high -10600
low- 9750
tp freq-12239

press SCAN ,,,,got 307 chnls....

good luck
 

Bronze Member
Username: Master_lee

Post Number: 12
Registered: Oct-07
gus you will find the answer to most of you questions

http://www.partsforhdtv.com/lnb-circular-dss-10750-11250-c-81.html?gclid=CMLemIr G0I8CFQdEFQod9DMs9g
 

Platinum Member
Username: Lklives

Post Number: 13527
Registered: Jan-06
The LNB needed is here too...

http://transatelectronics.com/store/118°-circular-10750-dual-lnb_P272

118° (Circular 10750) dual LNB
$24.95

This is the LNB for the new 118°W (Anik F3 / 118.7° / 118.8°) satellite. With this special LNB, you can get BOTH 118 and 119 at the same time!

Works with both Free-to-Air and Original DN Receivers!

Requires: 30-inch or larger dish
Compatible with DirecTV, Free-to-Air (DiSEqC, 22KHz), and legacy switches (SW21, SW44, etc)
Not compatible with DishPro switches and/or DishPro (stacked) LNB's

SPECS
Polarization: Circular
Input Frequency: 11.70 - 12.75 GHz
LO Frequency: 10.750 GHz
Noise: 0.5 dB

Dual-output (ready for 1 or 2 receivers)


SETUP INSTRUCTIONS
Using a 30-inch or larger dish, aim with the following settings:

Satellite Name: 118°W (Anik F3) or 119°W (Echo7)
LNB Type: Standard (or Single)
LO Frequency: 10750 or 10600 MHz
Finally, do an AUTO SCAN or a BLIND SCAN

For some the following settings may work better or give you more channels:

LNB Type: Universal
LO Frequency: 9750 MHz
HI Frequency: 11750 MHz


ALTERNATIVE SETUP
If there are any missing channels, MANUALLY scan them in. You can refer to the channel list at Lyngsat.c*om

You may also load this satellite using SharpC's Channel Master program.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us