Bronze Member Username: Gull123456
Post Number: 26
Registered: Dec-07
|
Posted on Tuesday, July 27, 2010 - 16:25 GMT please some one help me how i can use bublic server for sonicview
befor i was using privet server now i wan to come back so plese let me knew which file i have to use .and which setting i have to to which
ip config.
please |
|
|
Bronze Member Username: Gull123456
Post Number: 27
Registered: Dec-07
|
Posted on Tuesday, July 27, 2010 - 17:30 GMT please someone help me? |
Bronze Member Username: Gull123456
Post Number: 28
Registered: Dec-07
|
Posted on Tuesday, July 27, 2010 - 20:08 GMT why no one want to help me. |
Bronze Member Username: Xhounddog66
Post Number: 21
Registered: Aug-08
|
Posted on Wednesday, July 28, 2010 - 05:06 GMT Why do you want to come back? just curious. Is private server not good? |
Bronze Member Username: Tansarbh
Post Number: 52
Registered: Oct-08
|
Posted on Wednesday, July 28, 2010 - 15:00 GMT When you talk about public or private server in satellite world, what do you actually mean and how do you set this up?
I am reading lot of this terminalogy and was curious to know.
Thanks. |
Platinum Member Username: Nydas
Post Number: 19398
Registered: Jun-06
|
Posted on Wednesday, August 04, 2010 - 13:11 GMT Private Server is similar to card sharing with a few friends.
Public server is where anybody with the right hardware and firmware can access a site for IKS service. |
Silver Member Username: Juancho
CANADA
Xx
Post Number: 960
Registered: Jun-08
|
Posted on Thursday, August 05, 2010 - 03:46 GMT Why you want to come back? SV is using the same file for private and public, then they have the same problems, freezing,CCE(channel change error) on all channels, DN is like Pacquiao now
you have to choose one channel from a few as 105 and to do that you have to unplug LNB's cable, (turn off stb from back sw, disconnect cable ,turn on choose one channel, turn off, connect lnb cable turn on and watch one channel . |
Silver Member Username: Juancho
CANADA
Xx
Post Number: 961
Registered: Jun-08
|
Posted on Thursday, August 05, 2010 - 03:49 GMT Why you want to come back? SV is using the same file for private and public, then they have the same problems, freezing,CCE(channel change error) on all channels, DN is like Pacquiao now
you have to choose one channel from a few as 105 and to do that you have to unplug LNB's cable, (turn off stb from back sw, disconnect cable ,turn on choose one channel, turn off, connect lnb cable turn on and watch one channel . |
Silver Member Username: Liger
Post Number: 272
Registered: May-08
|
Posted on Thursday, August 05, 2010 - 06:21 GMT Temporal Solution to Channel Change Error
Follow this Step by step
1) Go to Dish Settings and turn off LNB Power to all the sats you use.
2) Save and Exit.
3)Insert a USB stick and go to USB File List.
4)Press Red Button to Upload channel list (this will save dish settings also)
Done
When you want to change channels all you have to do is go back to USB list and load the Channel BIN
This will automaticlly turn off LNB Power and reboot.
NO GETTING UP. NO POWER SWITCH. NO DISCONNECTING CABLES.
After reboot, change to new channel, go to Dish Settings and switch on LNB Power for that sat. |
Silver Member Username: Juancho
CANADA
Xx
Post Number: 962
Registered: Jun-08
|
Posted on Thursday, August 05, 2010 - 12:34 GMT Dosen't works, The stb has to be reboot back switch too, I did it the ways when post for first time 3 days ago.
1) Go to Dish Settings and turn off LNB Power to all the sats you use.
this is the problem, only rebooting with back sw the stb I could change the lnb's power ON , the same thing |
