Kbox+Powerline Adapters=????

Ok so I bought the Kbox prodigy yesterday and it works great!
That is when I use a 50 foot long ethernet cable that stretches from the second floor of my house to the main floor because I don't have 2 spots to plug both the satellite and my router (cable internet) upstairs. So I decided, lets save wire-hiding trouble and get 2 power line adapters and make it less messy and work a little less.

I've spend over 4 hours today trying to figure out why I can't seem to set them up. They are Ethernet power line adapters, so it's just plug and play.

I have tried connecting my laptop to the other adapter to test connectivity, no luck. I've almost given up and called someone to do this for me.

ANY help at all would be appreciated greatly!

it is plugged directly into a wall outlet..
It's an Intellon 85 Mbps Homeplug Turbo ethernet adaptor...
no luck still :S

Thanks in advance

amir u need to change the mode in to static and then change the ip adress if u want to ,
and then change it to dhcp,
ip should be 192.168.0.105 etc...
try the factory reset button when u are in network mode
make sure u have latest file..

http://www.dssrookie.com/forums/kbox-prodigy-files/100244-k1pro_201_20090625-a.h tml#post587356


k1pro_201_20090625
Version 2.01 (June 25, 2009)

KHub activation from receiver:

-copy KHub.rom to USB drive
-with KHub attached to receiver, power on
-Go to Menu: Utilities> Data Transfer> USB Explorer
_select KHub.rom and press OK
Attached Files
File Type: rar k1pro_201_20090625.rar (1.20 MB, 1169 views)

No green for me, No connection even for the laptop.

make sure to activate the khub.

My Khub light is green. I have also scan all channel. but when I select any channel from list it always displays 'processing please wait....'

Please help.

My dish direct is 118 and 110. Do you think that, it's a direction problem?


Moreover my signal color comes in yellow color. What does it means? It used to be in green in viewset box. I haVe checked network connection as well, iT displays 'Connected - ok'.

There is a yellow button called 'Download' on Network information screen. What is the use of this button. When I click on 'Download' button, the KHUb light goes red and a confirmation message is displayed that download 1.62 is avaiable. When I click 'Yes' it display another messages 'download fail'. I tried 100 times. Each time same message. After this it takes a while to get back green light by KHUB.

so far aamir no use of yellow button,
go to menu dish setting
ur sat for watching indo/pak channels should
be 118.8
lnb power on
type single
lnb freq 10750
22khz off
diseqc change it until u have 118 on top where it says dish setting right beside dish setting
u should get both level and quality signal
diseqc 1.1 and legacy should be turned off,

thanks sada, your help worked. System is working greate for me.